Vintage Simmons Drums (UK) Users Group

If it is a DIN to 4 RCA it will work.

Best

Michael

  ----- Original Message ----- 
  From: alfpaches@... [Simmons_Drums] 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Saturday, July 12, 2014 10:55 PM
  Subject: Re: Re : [Simmons Drums] SDS3 pads connector


    
  It´s the first thing I´ve thinking about but the only one from a hi-fi stuff I have is DIN in one side and RCA in the the other

What I forgot:

If you want to set up the original pads: There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 pins connected, pin 2 is the shield/ground. The slave pad pair is connected to the master pair with a stereo jack cable.

Best

Michael

  ----- Original Message ----- 
  From: alfpaches@... [Simmons_Drums] 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Saturday, July 12, 2014 10:55 PM
  Subject: Re: Re : [Simmons Drums] SDS3 pads connector


    
  It´s the first thing I´ve thinking about but the only one from a hi-fi stuff I have is DIN in one side and RCA in the the other

O.K.
Thanks, Micha! 


El Domingo 13 de julio de 2014 16:40, "'Michael Buchner' buchnerelectronics@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> escribió:
  


  
 
What I forgot: 
  
If you want to set up the original pads: 
There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 
pins connected, pin 2 is the shield/ground. The slave pad pair is connected to 
the master pair with a stereo jack cable. 
  
Best 
  
Michael 
  
  

----- Original Message -----  

>From: mailto:alfpaches@...%20[Simmons_Drums]  
>To: Simmons_Drums@yahoogroups.com  
>Sent: Saturday, July 12, 2014 10:55  PM 
>Subject: Re: Re : [Simmons Drums]  SDS3 pads connector 
>
>  
>It´s the first thing I´ve thinking about but the only one from a hi-fi  stuff I have is DIN in one side and RCA in the the  other

Yes, Micha, I know that. It comes wrote in a sticker under the master pair of pads. Thanks a lot for all the information 


El Lunes 14 de julio de 2014 7:28, ALFONSO PACHES <alfpaches@...> escribió:
  


O.K.
Thanks, Micha! 


El Domingo 13 de julio de 2014 16:40, "'Michael Buchner' buchnerelectronics@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> escribió:
  


  
 
What I forgot: 
  
If you want to set up the original pads: 
There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 
pins connected, pin 2 is the shield/ground. The slave pad pair is connected to 
the master pair with a stereo jack cable. 
  
Best 
  
Michael 
  
  

----- Original Message -----  

>From: mailto:alfpaches@...%20[Simmons_Drums]  
>To: Simmons_Drums@yahoogroups.com  
>Sent: Saturday, July 12, 2014 10:55  PM 
>Subject: Re: Re : [Simmons Drums]  SDS3 pads connector 
>
>  
>It´s the first thing I´ve thinking about but the only one from a hi-fi  stuff I have is DIN in one side and RCA in the the  other