SynthModules

I wired up one to mine.  I don't know anyone else who has.  Originally 
I connected it via serial.  You don't really need the switches 
although I added them.  A minimum interface requires just two wires 
and a low pass filter.  I have schematics of the serial version here.
http://modularsynthesis.com/modules/synthmodules/PSIM%20SpeakJet%
20schematic.jpg

I didn't do much with it because the programming was such a pain.  
Later I added a TTS256 chip which makes it really nice.  It is also 
serial and you can just wire it in series with the speakjet.  However, 
when I did this, I changed my interface from serial since it caused 
issues with MIDI although I don't think many people would be using 
both.  Some details here
http://modularsynthesis.com/modules/synthmodules/synthmodules.htm

Dave

--- In SynthModules@yahoogroups.com, "travesty14850" <travesty14850@.
..> wrote:
>
> I'd joined this group to see if any progress had been made on the
> SpeakJet module I'd read about online...but it looks like illness 
has
> set Brice back quite a bit.  I'm sorry to hear it, and hope you're
> feeling better.
> 
> Any intention of either building the SpeakJet module, or posting DIY
> plans on the web site?  The mp3 samples sounded wonderful!
>