SynthModules

I had a request to modify my divider and psuedo-sequencer from /2,
/4, /8, and /16 to arbitrary dividers.  I have modified the program
so each output can be any arbitrary divisor with defined high and low
states.  For example, the /4 can be 1 state high and three states low
or you could change it to a /3 with 1 state high and two low.  There
are 8 constants at the beginning of the program to define the four
dividers.  The default settings is for a /2, /3, /4, /6.  The
psuedo-sequence generation is unchanged and simply uses whatever
divisors are defined.  This program is in the sequencer folder

I have also completed my trig-gate-cv delay program and uploaded it
to the miscellaneous folder.  This program uses trigger, gate and cv
inputs and stores transitions into a buffer to be output after a
fixed delay based on an input cv.  The program default allows up to 3
seconds of delay.  There is a .mp3 of this in the samples folder as
described in message #519.

Dave