Dennis, There will be more PSIM-1 modules available. But first, I need to finish this current batch. I have a couple other ideas to compliment the PSIM-1 as well. Besides a MIDI module, I also see a plug-in white noise generator daughter board. I should have included that in the original design. We'll all talk about what's next once these are all shipped. - Brice http://www.SynthModules.com --- In SynthModules@yahoogroups.com, Dennis Verschoor <modular@g...> wrote: > So Brice > Gonna do another batch after these? > > Regards,. > > Dennis > > On 8/21/05, Brice D. Hornback <synthmodules@s...> wrote: > > > > Has anyone who received the partials I shipped wired them up yet? I still > > have a few more partials to ship and I'll be working on getting those > > finished up today... but it'll probably be sometime next week. I had two > > of > > the modules that I'm not satisfied with... so, I'll be replacing the DAC > > on > > both of them. By the way, polarity of an electrolytic *really does > > matter*! > > hehe Yep, even I make a mistake once in a while. I put one of the little > > power regulator caps in backwards. My wife was standing next to me when I > > powered it up. It was quite the little pop and scared the crap out of her. > > > > It didn't affect the module at all... but was a bit startling. So, yes... > > I > > let the smoke out of one of the PSIM-1 modules. I guess a project just > > can't be completed without that happening at least once. Now I can get > > these finished. :) > > > > Anyway, testing the partials takes about ten times as long as the > > completed > > modules (no jacks to plug into or switches to push)... and I can't wait > > until these final few are gone. ;) Then on to the fully assembled. Not > > too much longer... > > > > I really would like to hear from those of you who received the partials. > > It > > takes about an hour or two to wire them (assuming you already have your > > jacks and switches on the panels). Simply install the Atom Pro development > > > > software on your Windows machine, connect the serial cable, apply power to > > > > the PSIM-1 (which is already programmed with either a four channel > > chromatic > > quantizer program or a sweep program; depends on which one I finished with > > > > during testing... I use about five different programs to test them). Open > > up a program in the Basic Atom Pro software and hit the "Program" button > > at > > the top. That's all there is to it. There are over 100 programs on the CD > > to get you started. > > > > I'd recommend the following as a first program: > > psim-1-sample_and_hold-quantizer-demo.bas > > > > Plug in a joystick or Noise source or VCO, LFO, or whatever to the inputs. > > > > You get four channels of S&H chromatically quantized CV at 160bpm (can be > > changed in the code). Run the output to a VCO, filter, or anything else > > you > > want to control with quantized CV. > > > > Not to sound too arrogant (I don't use that word lightly - it's > > justifiable; > > try it and you'll see)... but you'll find out the PSIM-1 is the *best* > > quantizer, S&H, sequencer, etc. module ever built or conceived. Those of > > you who have them already know this. The possibilities are endless... and > > this is only the beginning! > > > > Enjoy! > > - Brice > > http://www.SynthModules.com <http://www.synthmodules.com/> > > > > > > ----- Original Message ----- > > From: "Romeo Fahl" <rfahl@p...> > > To: <SynthModules@yahoogroups.com> > > Sent: Wednesday, August 17, 2005 3:08 PM > > Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING! > > > > > > > Got mine today. The wait is over! Thank you very much. > > > > > > Romeo > > > > > > > > > On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote: > > > > > >> Hello everyone. Okay, I've began printing postage labels and getting > > >> the > > >> modules ready to ship. Partials will begin shipping tomorrow and the > > >> complete modules following shortly. > > >> > > >> IMPORTANT: I have received numerous emails from people who have > > >> claimed to > > >> have sent money to someone and I'm supposed to ship the module to them > > >> instead. Wonderful... huh? How am I supposed to know for sure? So, > > >> I will > > >> only ship to the *Original Purchaser* (except those who I made > > >> arrangements > > >> with at the beginning) and if you've sold your "place in line" or > > >> whatever... *you* can ship to your buyer. I can't get stuck in the > > >> middle. > > >> I know I've received a couple emails from a couple of you who have > > >> changed > > >> addresses. That's no problem (as long as I have confirmed I have the > > >> correct address). Otherwise, I will only ship to the address on the > > >> original PayPal transaction. I hope you all understand. > > >> > > >> Also, if any of you simply can NOT wait any longer and want me to ship > > >> the > > >> panels and PCBs so you can wire them up and test them... let me know. > > >> The > > >> boards are complete and the panels already have all the jacks, > > >> switches, and > > >> buttons installed. It's only a matter of connecting about a dozen > > >> wires and > > >> a ribbon cable and it's done. Otherwise, I'll be getting them shipped > > >> out > > >> probably two or three a week until they are all gone. I'm working two > > >> full-time jobs and spare time is rare. Otherwise... please have a bit > > >> more > > >> patience with me. I know this has been a long ride... and everyone > > >> has been > > >> *extremely* patient. That's one thing I love about the synth > > >> community. > > >> Those of you who know me personally know I am a man of my word. I > > >> have put > > >> a lot of blood, sweat, and tears into these modules. But those of you > > >> who > > >> already have them, and those of you that will start receiving them in > > >> the > > >> next couple days... will know it's worth the wait. > > >> > > >> Here are links to a couple photos showing all the modules: > > >> > > >> http://www.synthmodules.com/images/psim-1-batch_a.jpg > > >> > > >> http://www.synthmodules.com/images/psim-1-batch_b.jpg > > >> > > >> That's Larry's sitting on top... ready to go! > > >> > > >> If you have any questions, please contact me off-list. > > >> > > >> Best regards, > > >> Brice > > >> http://www.SynthModules.com <http://www.synthmodules.com/> > > >> > > >> > > >> > > >> > > >> > > >> Be sure to check out the primary Web site at: > > >> http://www.SynthModules.com <http://www.synthmodules.com/> > > >> > > >> Yahoo! Groups Links > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > > > > > > > > > > > > > > Be sure to check out the primary Web site at: > > > http://www.SynthModules.com <http://www.synthmodules.com/> > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Be sure to check out the primary Web site at: > > http://www.SynthModules.com <http://www.synthmodules.com/> > > > > > > > > > > SPONSORED LINKS > > Moog synthesizer<http://groups.yahoo.com/gads?t=ms&k=Moog+synthesizer&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=YUxX-Tewr-98nNVh6uLTMg> > > Paia<http://groups.yahoo.com/gads?t=ms&k=Paia&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=FFZNUlRfSxzOkP9tPCLvEA> > > ------------------------------ > > YAHOO! GROUPS LINKS > > > > > > - Visit your group "SynthModules<http://groups.yahoo.com/group/SynthModules>" > > on the web. > > - To unsubscribe from this group, send an email to: > > SynthModules-unsubscribe@yahoogroups.com<SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > - Your use of Yahoo! Groups is subject to the Yahoo! Terms of > > Service <http://docs.yahoo.com/info/terms/>. > > > > > > ------------------------------ > > > > > > -- > ---------------------------------------------------------------------------------- > - Gear pictures at: http://jx.riscy.net/gallery/albums.php - > - - > - Music at: http://www.soundclick.com/trestrois - > ---------------------------------------------------------------------------------- > > > [Non-text portions of this message have been removed]
Message
Re: SynthModule PSIM-1's are SHIPPING!
2005-08-21 by synthmodules