SynthModules

Has anyone gotten their PSIM yet?  How much longer do we have to wait?  The fact that no 
one is reporting that they've received theirs is alarming.

Romeo

--- In SynthModules@yahoogroups.com, "vtl5c3" <rfahl@p...> wrote:
> Has anyone gotten their PSIM yet?  How much longer do we have to
wait?  The fact that no 
> one is reporting that they've received theirs is alarming.
> 
> Romeo

hey romeo,

still waiting for mine, eighteen months after payment...

gregg.

Don't be alarmed.  Those who ordered the "partials" will be receiving 
shipping confirmations starting Monday.  "Complete" modules will follow 
shortly.

More updates later...

- Brice

----- Original Message ----- 

From: "vtl5c3" <rfahl@pdx.edu>
To: <SynthModules@yahoogroups.com>
Sent: Saturday, August 13, 2005 11:12 AM
Subject: [SynthModules] Status?!??!


> Has anyone gotten their PSIM yet?  How much longer do we have to wait? 
> The fact that no
> one is reporting that they've received theirs is alarming.
>
> Romeo

Hello everyone.  Okay, I've began printing postage labels and getting the
modules ready to ship.  Partials will begin shipping tomorrow and the
complete modules following shortly.

IMPORTANT:  I have received numerous emails from people who have claimed to
have sent money to someone and I'm supposed to ship the module to them
instead.  Wonderful... huh?  How am I supposed to know for sure?  So, I will
only ship to the *Original Purchaser* (except those who I made arrangements
with at the beginning) and if you've sold your "place in line" or
whatever... *you* can ship to your buyer.  I can't get stuck in the middle.
I know I've received a couple emails from a couple of you who have changed
addresses.  That's no problem (as long as I have confirmed I have the
correct address).  Otherwise, I will only ship to the address on the
original PayPal transaction.  I hope you all understand.

Also, if any of you simply can NOT wait any longer and want me to ship the
panels and PCBs so you can wire them up and test them... let me know.  The
boards are complete and the panels already have all the jacks, switches, and
buttons installed.  It's only a matter of connecting about a dozen wires and
a ribbon cable and it's done.  Otherwise, I'll be getting them shipped out
probably two or three a week until they are all gone.  I'm working two
full-time jobs and spare time is rare.  Otherwise... please have a bit more
patience with me.  I know this has been a long ride... and everyone has been
*extremely* patient.  That's one thing I love about the synth community.
Those of you who know me personally know I am a man of my word.  I have put
a lot of blood, sweat, and tears into these modules.  But those of you who
already have them, and those of you that will start receiving them in the
next couple days... will know it's worth the wait.

Here are links to a couple photos showing all the modules:

http://www.synthmodules.com/images/psim-1-batch_a.jpg

http://www.synthmodules.com/images/psim-1-batch_b.jpg

That's Larry's sitting on top... ready to go!

If you have any questions, please contact me off-list.

Best regards,
Brice
http://www.SynthModules.com

If anyone else who ordered a PSIM-1 has moved (changed address)...
PLEASE send me an email off-list to confirm I have your current
shipping address.  

Thanks!
- Brice

--- In SynthModules@yahoogroups.com, "Brice D. Hornback"
<synthmodules@s...> wrote:
> Hello everyone.  Okay, I've began printing postage labels and
getting the
> modules ready to ship.  Partials will begin shipping tomorrow and the
> complete modules following shortly.
> 
> IMPORTANT:  I have received numerous emails from people who have
claimed to
> have sent money to someone and I'm supposed to ship the module to them
> instead.  Wonderful... huh?  How am I supposed to know for sure? 
So, I will
> only ship to the *Original Purchaser* (except those who I made
arrangements
> with at the beginning) and if you've sold your "place in line" or
> whatever... *you* can ship to your buyer.  I can't get stuck in the
middle.
> I know I've received a couple emails from a couple of you who have
changed
> addresses.  That's no problem (as long as I have confirmed I have the
> correct address).  Otherwise, I will only ship to the address on the
> original PayPal transaction.  I hope you all understand.
> 
> Also, if any of you simply can NOT wait any longer and want me to
ship the
> panels and PCBs so you can wire them up and test them... let me
know.  The
> boards are complete and the panels already have all the jacks,
switches, and
> buttons installed.  It's only a matter of connecting about a dozen
wires and
> a ribbon cable and it's done.  Otherwise, I'll be getting them
shipped out
> probably two or three a week until they are all gone.  I'm working two
> full-time jobs and spare time is rare.  Otherwise... please have a
bit more
> patience with me.  I know this has been a long ride... and everyone
has been
> *extremely* patient.  That's one thing I love about the synth community.
> Those of you who know me personally know I am a man of my word.  I
have put
> a lot of blood, sweat, and tears into these modules.  But those of
you who
> already have them, and those of you that will start receiving them
in the

> next couple days... will know it's worth the wait.
> 
> Here are links to a couple photos showing all the modules:
> 
> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> 
> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> 
> That's Larry's sitting on top... ready to go!
> 
> If you have any questions, please contact me off-list.
> 
> Best regards,
> Brice
> http://www.SynthModules.com

that's GREAT news! 

finally :) 

can't wait to play!!!

gregg.

--- In SynthModules@yahoogroups.com, "Brice D. Hornback"
<synthmodules@s...> wrote:
> Hello everyone.  Okay, I've began printing postage labels and
getting the
> modules ready to ship.  Partials will begin shipping tomorrow and the
> complete modules following shortly.
> 
> IMPORTANT:  I have received numerous emails from people who have
claimed to
> have sent money to someone and I'm supposed to ship the module to them
> instead.  Wonderful... huh?  How am I supposed to know for sure? 
So, I will
> only ship to the *Original Purchaser* (except those who I made
arrangements
> with at the beginning) and if you've sold your "place in line" or
> whatever... *you* can ship to your buyer.  I can't get stuck in the
middle.
> I know I've received a couple emails from a couple of you who have
changed
> addresses.  That's no problem (as long as I have confirmed I have the
> correct address).  Otherwise, I will only ship to the address on the
> original PayPal transaction.  I hope you all understand.
> 
> Also, if any of you simply can NOT wait any longer and want me to
ship the
> panels and PCBs so you can wire them up and test them... let me
know.  The
> boards are complete and the panels already have all the jacks,
switches, and
> buttons installed.  It's only a matter of connecting about a dozen
wires and
> a ribbon cable and it's done.  Otherwise, I'll be getting them
shipped out
> probably two or three a week until they are all gone.  I'm working two
> full-time jobs and spare time is rare.  Otherwise... please have a
bit more
> patience with me.  I know this has been a long ride... and everyone
has been
> *extremely* patient.  That's one thing I love about the synth community.
> Those of you who know me personally know I am a man of my word.  I
have put
> a lot of blood, sweat, and tears into these modules.  But those of
you who
> already have them, and those of you that will start receiving them
in the

> next couple days... will know it's worth the wait.
> 
> Here are links to a couple photos showing all the modules:
> 
> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> 
> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> 
> That's Larry's sitting on top... ready to go!
> 
> If you have any questions, please contact me off-list.
> 
> Best regards,
> Brice
> http://www.SynthModules.com

My PSIM-1 arrived today.  I have the partial for the MOTM panel.  So,
I cannot play until I read the docs and figure out how to finish up
wiring it all up. 

The build quality is just fine and I expect everyone will be quite
happy with theirs.  

I know tis has been a tough year Brice.  Thanks for finally making
this happen.

Larry Hendry



	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail

Got mine today.  The wait is over!   Thank you very much.

Romeo

On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:

> Hello everyone.  Okay, I've began printing postage labels and getting  
> the
> modules ready to ship.  Partials will begin shipping tomorrow and the
> complete modules following shortly.
>
> IMPORTANT:  I have received numerous emails from people who have  
> claimed to
> have sent money to someone and I'm supposed to ship the module to them
> instead.  Wonderful... huh?  How am I supposed to know for sure?  So,  
> I will
> only ship to the *Original Purchaser* (except those who I made  
> arrangements
> with at the beginning) and if you've sold your "place in line" or
> whatever... *you* can ship to your buyer.  I can't get stuck in the  
> middle.
> I know I've received a couple emails from a couple of you who have  
> changed
> addresses.  That's no problem (as long as I have confirmed I have the
> correct address).  Otherwise, I will only ship to the address on the
> original PayPal transaction.  I hope you all understand.
>
> Also, if any of you simply can NOT wait any longer and want me to ship  
> the
> panels and PCBs so you can wire them up and test them... let me know.   
> The
> boards are complete and the panels already have all the jacks,  
> switches, and
> buttons installed.  It's only a matter of connecting about a dozen  
> wires and
> a ribbon cable and it's done.  Otherwise, I'll be getting them shipped  
> out
> probably two or three a week until they are all gone.  I'm working two
> full-time jobs and spare time is rare.  Otherwise... please have a bit  
> more
> patience with me.  I know this has been a long ride... and everyone  
> has been
> *extremely* patient.  That's one thing I love about the synth  
> community.
> Those of you who know me personally know I am a man of my word.  I  
> have put
> a lot of blood, sweat, and tears into these modules.  But those of you  
> who
> already have them, and those of you that will start receiving them in  
> the
> next couple days... will know it's worth the wait.
>
> Here are links to a couple photos showing all the modules:
>
> http://www.synthmodules.com/images/psim-1-batch_a.jpg
>
> http://www.synthmodules.com/images/psim-1-batch_b.jpg
>
> That's Larry's sitting on top... ready to go!
>
> If you have any questions, please contact me off-list.
>
> Best regards,
> Brice
> http://www.SynthModules.com
>
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Dennis,

There will be more PSIM-1 modules available.  

But first, I need to finish this current batch.  I have a couple other
ideas to compliment the PSIM-1 as well.  Besides a MIDI module, I also
see a plug-in white noise generator daughter board.  I should have
included that in the original design.  We'll all talk about what's
next once these are all shipped.  

- Brice
http://www.SynthModules.com 


--- In SynthModules@yahoogroups.com, Dennis Verschoor <modular@g...>
wrote:
> So Brice
>  Gonna do another batch after these?
> 
> Regards,.
> 
> Dennis
> 
>  On 8/21/05, Brice D. Hornback <synthmodules@s...> wrote: 
> > 
> > Has anyone who received the partials I shipped wired them up yet?
I still 
> > have a few more partials to ship and I'll be working on getting those 
> > finished up today... but it'll probably be sometime next week. I
had two 
> > of 
> > the modules that I'm not satisfied with... so, I'll be replacing
the DAC 
> > on 
> > both of them. By the way, polarity of an electrolytic *really does 
> > matter*! 
> > hehe Yep, even I make a mistake once in a while. I put one of the
little 
> > power regulator caps in backwards. My wife was standing next to me
when I 
> > powered it up. It was quite the little pop and scared the crap out
of her. 
> > 
> > It didn't affect the module at all... but was a bit startling. So,
yes... 
> > I 
> > let the smoke out of one of the PSIM-1 modules. I guess a project
just 
> > can't be completed without that happening at least once. Now I can
get 
> > these finished. :)
> > 
> > Anyway, testing the partials takes about ten times as long as the 
> > completed 
> > modules (no jacks to plug into or switches to push)... and I can't
wait 
> > until these final few are gone. ;) Then on to the fully assembled.
Not 
> > too much longer...
> > 
> > I really would like to hear from those of you who received the
partials. 
> > It 
> > takes about an hour or two to wire them (assuming you already have
your 
> > jacks and switches on the panels). Simply install the Atom Pro
development 
> > 
> > software on your Windows machine, connect the serial cable, apply
power to 
> > 
> > the PSIM-1 (which is already programmed with either a four channel 
> > chromatic 
> > quantizer program or a sweep program; depends on which one I
finished with 
> > 
> > during testing... I use about five different programs to test
them). Open 
> > up a program in the Basic Atom Pro software and hit the "Program"
button 
> > at 
> > the top. That's all there is to it. There are over 100 programs on
the CD 
> > to get you started.
> > 
> > I'd recommend the following as a first program:
> > psim-1-sample_and_hold-quantizer-demo.bas
> > 
> > Plug in a joystick or Noise source or VCO, LFO, or whatever to the
inputs. 
> > 
> > You get four channels of S&H chromatically quantized CV at 160bpm
(can be 
> > changed in the code). Run the output to a VCO, filter, or anything
else 
> > you 
> > want to control with quantized CV.
> > 
> > Not to sound too arrogant (I don't use that word lightly - it's 
> > justifiable; 
> > try it and you'll see)... but you'll find out the PSIM-1 is the
*best* 
> > quantizer, S&H, sequencer, etc. module ever built or conceived.
Those of 
> > you who have them already know this. The possibilities are
endless... and 
> > this is only the beginning!
> > 
> > Enjoy!
> > - Brice
> > http://www.SynthModules.com <http://www.synthmodules.com/>
> > 
> > 
> > ----- Original Message ----- 
> > From: "Romeo Fahl" <rfahl@p...>
> > To: <SynthModules@yahoogroups.com>
> > Sent: Wednesday, August 17, 2005 3:08 PM
> > Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING!
> > 
> > 
> > > Got mine today. The wait is over! Thank you very much.
> > >
> > > Romeo
> > >
> > >
> > > On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:
> > >
> > >> Hello everyone. Okay, I've began printing postage labels and
getting
> > >> the
> > >> modules ready to ship. Partials will begin shipping tomorrow
and the
> > >> complete modules following shortly.
> > >>
> > >> IMPORTANT: I have received numerous emails from people who have
> > >> claimed to
> > >> have sent money to someone and I'm supposed to ship the module
to them
> > >> instead. Wonderful... huh? How am I supposed to know for sure? So,
> > >> I will
> > >> only ship to the *Original Purchaser* (except those who I made
> > >> arrangements
> > >> with at the beginning) and if you've sold your "place in line" or
> > >> whatever... *you* can ship to your buyer. I can't get stuck in the
> > >> middle.
> > >> I know I've received a couple emails from a couple of you who have
> > >> changed
> > >> addresses. That's no problem (as long as I have confirmed I
have the
> > >> correct address). Otherwise, I will only ship to the address on the
> > >> original PayPal transaction. I hope you all understand.
> > >>
> > >> Also, if any of you simply can NOT wait any longer and want me
to ship
> > >> the
> > >> panels and PCBs so you can wire them up and test them... let me
know.
> > >> The
> > >> boards are complete and the panels already have all the jacks,
> > >> switches, and
> > >> buttons installed. It's only a matter of connecting about a dozen
> > >> wires and
> > >> a ribbon cable and it's done. Otherwise, I'll be getting them
shipped
> > >> out
> > >> probably two or three a week until they are all gone. I'm
working two
> > >> full-time jobs and spare time is rare. Otherwise... please have
a bit
> > >> more
> > >> patience with me. I know this has been a long ride... and everyone
> > >> has been
> > >> *extremely* patient. That's one thing I love about the synth
> > >> community.
> > >> Those of you who know me personally know I am a man of my word. I
> > >> have put
> > >> a lot of blood, sweat, and tears into these modules. But those
of you
> > >> who
> > >> already have them, and those of you that will start receiving
them in
> > >> the
> > >> next couple days... will know it's worth the wait.
> > >>
> > >> Here are links to a couple photos showing all the modules:
> > >>
> > >> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> > >>
> > >> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> > >>
> > >> That's Larry's sitting on top... ready to go!
> > >>
> > >> If you have any questions, please contact me off-list.
> > >>
> > >> Best regards,
> > >> Brice
> > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> Be sure to check out the primary Web site at:
> > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > >>
> > >> Yahoo! Groups Links
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >
> > > Be sure to check out the primary Web site at:
> > > http://www.SynthModules.com <http://www.synthmodules.com/>
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > > 
> > 
> > 
> > 
> > Be sure to check out the primary Web site at:
> > http://www.SynthModules.com <http://www.synthmodules.com/>
> > 
> > 
> > 
> > 
> > SPONSORED LINKS 
> >   Moog
synthesizer<http://groups.yahoo.com/gads?t=ms&k=Moog+synthesizer&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=YUxX-Tewr-98nNVh6uLTMg>

> >
Paia<http://groups.yahoo.com/gads?t=ms&k=Paia&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=FFZNUlRfSxzOkP9tPCLvEA>

> >  ------------------------------
> > YAHOO! GROUPS LINKS 
> > 
> > 
> >    - Visit your group
"SynthModules<http://groups.yahoo.com/group/SynthModules>" 
> >    on the web.
> >     - To unsubscribe from this group, send an email to:
> >   
SynthModules-unsubscribe@yahoogroups.com<SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> >     - Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> >    Service <http://docs.yahoo.com/info/terms/>. 
> > 
> > 
> >  ------------------------------
> > 
> 
> 
> 
> -- 
>
----------------------------------------------------------------------------------
> - Gear pictures at: http://jx.riscy.net/gallery/albums.php -
> - -
> - Music at: http://www.soundclick.com/trestrois -
>
----------------------------------------------------------------------------------

> 
> 
> [Non-text portions of this message have been removed]

Has anyone who received the partials I shipped wired them up yet?  I still 
have a few more partials to ship and I'll be working on getting those 
finished up today... but it'll probably be sometime next week.  I had two of 
the modules that I'm not satisfied with... so, I'll be replacing the DAC on 
both of them.  By the way, polarity of an electrolytic *really does matter*! 
hehe  Yep, even I make a mistake once in a while.  I put one of the little 
power regulator caps in backwards.  My wife was standing next to me when I 
powered it up.  It was quite the little pop and scared the crap out of her. 
It didn't affect the module at all... but was a bit startling.  So, yes... I 
let the smoke out of one of the PSIM-1 modules.  I guess a project just 
can't be completed without that happening at least once.  Now I can get 
these finished.  :)

Anyway, testing the partials takes about ten times as long as the completed 
modules (no jacks to plug into or switches to push)... and I can't wait 
until these final few are gone.  ;)  Then on to the fully assembled.  Not 
too much longer...

I really would like to hear from those of you who received the partials.  It 
takes about an hour or two to wire them (assuming you already have your 
jacks and switches on the panels).  Simply install the Atom Pro development 
software on your Windows machine, connect the serial cable, apply power to 
the PSIM-1 (which is already programmed with either a four channel chromatic 
quantizer program or a sweep program; depends on which one I finished with 
during testing... I use about five different programs to test them).  Open 
up a program in the Basic Atom Pro software and hit the "Program" button at 
the top.  That's all there is to it.  There are over 100 programs on the CD 
to get you started.

I'd recommend the following as a first program:
psim-1-sample_and_hold-quantizer-demo.bas

Plug in a joystick or Noise source or VCO, LFO, or whatever to the inputs. 
You get four channels of S&H chromatically quantized CV at 160bpm (can be 
changed in the code).  Run the output to a VCO, filter, or anything else you 
want to control with quantized CV.

Not to sound too arrogant (I don't use that word lightly - it's justifiable; 
try it and you'll see)... but you'll find out the PSIM-1 is the *best* 
quantizer, S&H, sequencer, etc. module ever built or conceived.  Those of 
you who have them already know this.  The possibilities are endless... and 
this is only the beginning!

Enjoy!
- Brice
http://www.SynthModules.com


----- Original Message ----- 

From: "Romeo Fahl" <rfahl@pdx.edu>
To: <SynthModules@yahoogroups.com>
Sent: Wednesday, August 17, 2005 3:08 PM
Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING!


> Got mine today.  The wait is over!   Thank you very much.
>
> Romeo
>
>
> On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:
>
>> Hello everyone.  Okay, I've began printing postage labels and getting
>> the
>> modules ready to ship.  Partials will begin shipping tomorrow and the
>> complete modules following shortly.
>>
>> IMPORTANT:  I have received numerous emails from people who have
>> claimed to
>> have sent money to someone and I'm supposed to ship the module to them
>> instead.  Wonderful... huh?  How am I supposed to know for sure?  So,
>> I will
>> only ship to the *Original Purchaser* (except those who I made
>> arrangements
>> with at the beginning) and if you've sold your "place in line" or
>> whatever... *you* can ship to your buyer.  I can't get stuck in the
>> middle.
>> I know I've received a couple emails from a couple of you who have
>> changed
>> addresses.  That's no problem (as long as I have confirmed I have the
>> correct address).  Otherwise, I will only ship to the address on the
>> original PayPal transaction.  I hope you all understand.
>>
>> Also, if any of you simply can NOT wait any longer and want me to ship
>> the
>> panels and PCBs so you can wire them up and test them... let me know.
>> The
>> boards are complete and the panels already have all the jacks,
>> switches, and
>> buttons installed.  It's only a matter of connecting about a dozen
>> wires and
>> a ribbon cable and it's done.  Otherwise, I'll be getting them shipped
>> out
>> probably two or three a week until they are all gone.  I'm working two
>> full-time jobs and spare time is rare.  Otherwise... please have a bit
>> more
>> patience with me.  I know this has been a long ride... and everyone
>> has been
>> *extremely* patient.  That's one thing I love about the synth
>> community.
>> Those of you who know me personally know I am a man of my word.  I
>> have put
>> a lot of blood, sweat, and tears into these modules.  But those of you
>> who
>> already have them, and those of you that will start receiving them in
>> the
>> next couple days... will know it's worth the wait.
>>
>> Here are links to a couple photos showing all the modules:
>>
>> http://www.synthmodules.com/images/psim-1-batch_a.jpg
>>
>> http://www.synthmodules.com/images/psim-1-batch_b.jpg
>>
>> That's Larry's sitting on top... ready to go!
>>
>> If you have any questions, please contact me off-list.
>>
>> Best regards,
>> Brice
>> http://www.SynthModules.com
>>
>>
>>
>>
>>
>> Be sure to check out the primary Web site at:
>> http://www.SynthModules.com
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

So Brice
 Gonna do another batch after these?

Regards,.

Dennis

 On 8/21/05, Brice D. Hornback <synthmodules@synthmodules.com> wrote: 
> 
> Has anyone who received the partials I shipped wired them up yet? I still 
> have a few more partials to ship and I'll be working on getting those 
> finished up today... but it'll probably be sometime next week. I had two 
> of 
> the modules that I'm not satisfied with... so, I'll be replacing the DAC 
> on 
> both of them. By the way, polarity of an electrolytic *really does 
> matter*! 
> hehe Yep, even I make a mistake once in a while. I put one of the little 
> power regulator caps in backwards. My wife was standing next to me when I 
> powered it up. It was quite the little pop and scared the crap out of her. 
> 
> It didn't affect the module at all... but was a bit startling. So, yes... 
> I 
> let the smoke out of one of the PSIM-1 modules. I guess a project just 
> can't be completed without that happening at least once. Now I can get 
> these finished. :)
> 
> Anyway, testing the partials takes about ten times as long as the 
> completed 
> modules (no jacks to plug into or switches to push)... and I can't wait 
> until these final few are gone. ;) Then on to the fully assembled. Not 
> too much longer...
> 
> I really would like to hear from those of you who received the partials. 
> It 
> takes about an hour or two to wire them (assuming you already have your 
> jacks and switches on the panels). Simply install the Atom Pro development 
> 
> software on your Windows machine, connect the serial cable, apply power to 
> 
> the PSIM-1 (which is already programmed with either a four channel 
> chromatic 
> quantizer program or a sweep program; depends on which one I finished with 
> 
> during testing... I use about five different programs to test them). Open 
> up a program in the Basic Atom Pro software and hit the "Program" button 
> at 
> the top. That's all there is to it. There are over 100 programs on the CD 
> to get you started.
> 
> I'd recommend the following as a first program:
> psim-1-sample_and_hold-quantizer-demo.bas
> 
> Plug in a joystick or Noise source or VCO, LFO, or whatever to the inputs. 
> 
> You get four channels of S&H chromatically quantized CV at 160bpm (can be 
> changed in the code). Run the output to a VCO, filter, or anything else 
> you 
> want to control with quantized CV.
> 
> Not to sound too arrogant (I don't use that word lightly - it's 
> justifiable; 
> try it and you'll see)... but you'll find out the PSIM-1 is the *best* 
> quantizer, S&H, sequencer, etc. module ever built or conceived. Those of 
> you who have them already know this. The possibilities are endless... and 
> this is only the beginning!
> 
> Enjoy!
> - Brice
> http://www.SynthModules.com <http://www.synthmodules.com/>
> 
> 
> ----- Original Message ----- 
> From: "Romeo Fahl" <rfahl@pdx.edu>
> To: <SynthModules@yahoogroups.com>
> Sent: Wednesday, August 17, 2005 3:08 PM
> Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING!
> 
> 
> > Got mine today. The wait is over! Thank you very much.
> >
> > Romeo
> >
> >
> > On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:
> >
> >> Hello everyone. Okay, I've began printing postage labels and getting
> >> the
> >> modules ready to ship. Partials will begin shipping tomorrow and the
> >> complete modules following shortly.
> >>
> >> IMPORTANT: I have received numerous emails from people who have
> >> claimed to
> >> have sent money to someone and I'm supposed to ship the module to them
> >> instead. Wonderful... huh? How am I supposed to know for sure? So,
> >> I will
> >> only ship to the *Original Purchaser* (except those who I made
> >> arrangements
> >> with at the beginning) and if you've sold your "place in line" or
> >> whatever... *you* can ship to your buyer. I can't get stuck in the
> >> middle.
> >> I know I've received a couple emails from a couple of you who have
> >> changed
> >> addresses. That's no problem (as long as I have confirmed I have the
> >> correct address). Otherwise, I will only ship to the address on the
> >> original PayPal transaction. I hope you all understand.
> >>
> >> Also, if any of you simply can NOT wait any longer and want me to ship
> >> the
> >> panels and PCBs so you can wire them up and test them... let me know.
> >> The
> >> boards are complete and the panels already have all the jacks,
> >> switches, and
> >> buttons installed. It's only a matter of connecting about a dozen
> >> wires and
> >> a ribbon cable and it's done. Otherwise, I'll be getting them shipped
> >> out
> >> probably two or three a week until they are all gone. I'm working two
> >> full-time jobs and spare time is rare. Otherwise... please have a bit
> >> more
> >> patience with me. I know this has been a long ride... and everyone
> >> has been
> >> *extremely* patient. That's one thing I love about the synth
> >> community.
> >> Those of you who know me personally know I am a man of my word. I
> >> have put
> >> a lot of blood, sweat, and tears into these modules. But those of you
> >> who
> >> already have them, and those of you that will start receiving them in
> >> the
> >> next couple days... will know it's worth the wait.
> >>
> >> Here are links to a couple photos showing all the modules:
> >>
> >> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> >>
> >> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> >>
> >> That's Larry's sitting on top... ready to go!
> >>
> >> If you have any questions, please contact me off-list.
> >>
> >> Best regards,
> >> Brice
> >> http://www.SynthModules.com <http://www.synthmodules.com/>
> >>
> >>
> >>
> >>
> >>
> >> Be sure to check out the primary Web site at:
> >> http://www.SynthModules.com <http://www.synthmodules.com/>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > Be sure to check out the primary Web site at:
> > http://www.SynthModules.com <http://www.synthmodules.com/>
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> > 
> 
> 
> 
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com <http://www.synthmodules.com/>
> 
> 
> 
> 
> SPONSORED LINKS 
>   Moog synthesizer<http://groups.yahoo.com/gads?t=ms&k=Moog+synthesizer&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=YUxX-Tewr-98nNVh6uLTMg> 
> Paia<http://groups.yahoo.com/gads?t=ms&k=Paia&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=FFZNUlRfSxzOkP9tPCLvEA> 
>  ------------------------------
> YAHOO! GROUPS LINKS 
> 
> 
>    - Visit your group "SynthModules<http://groups.yahoo.com/group/SynthModules>" 
>    on the web.
>     - To unsubscribe from this group, send an email to:
>    SynthModules-unsubscribe@yahoogroups.com<SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>     - Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
>    Service <http://docs.yahoo.com/info/terms/>. 
> 
> 
>  ------------------------------
> 



-- 
----------------------------------------------------------------------------------
- Gear pictures at: http://jx.riscy.net/gallery/albums.php -
- -
- Music at: http://www.soundclick.com/trestrois -
----------------------------------------------------------------------------------


[Non-text portions of this message have been removed]

Ok that's cool.
Put me on the list for 2!

Regards,

Dennis

On 8/21/05, synthmodules <synthmodules@synthmodules.com> wrote:
> Dennis,
> 
> There will be more PSIM-1 modules available.  
> 
> But first, I need to finish this current batch.  I have a couple other
> ideas to compliment the PSIM-1 as well.  Besides a MIDI module, I also
> see a plug-in white noise generator daughter board.  I should have
> included that in the original design.  We'll all talk about what's
> next once these are all shipped.  
> 
> - Brice
> http://www.SynthModules.com 
> 
> 
> --- In SynthModules@yahoogroups.com, Dennis Verschoor <modular@g...>
> wrote:
> > So Brice
> >  Gonna do another batch after these?
> > 
> > Regards,.
> > 
> > Dennis
> > 
> >  On 8/21/05, Brice D. Hornback <synthmodules@s...> wrote: 
> > > 
> > > Has anyone who received the partials I shipped wired them up yet?
> I still 
> > > have a few more partials to ship and I'll be working on getting those 
> > > finished up today... but it'll probably be sometime next week. I
> had two 
> > > of 
> > > the modules that I'm not satisfied with... so, I'll be replacing
> the DAC 
> > > on 
> > > both of them. By the way, polarity of an electrolytic *really does 
> > > matter*! 
> > > hehe Yep, even I make a mistake once in a while. I put one of the
> little 
> > > power regulator caps in backwards. My wife was standing next to me
> when I 
> > > powered it up. It was quite the little pop and scared the crap out
> of her. 
> > > 
> > > It didn't affect the module at all... but was a bit startling. So,
> yes... 
> > > I 
> > > let the smoke out of one of the PSIM-1 modules. I guess a project
> just 
> > > can't be completed without that happening at least once. Now I can
> get 
> > > these finished. :)
> > > 
> > > Anyway, testing the partials takes about ten times as long as the 
> > > completed 
> > > modules (no jacks to plug into or switches to push)... and I can't
> wait 
> > > until these final few are gone. ;) Then on to the fully assembled.
> Not 
> > > too much longer...
> > > 
> > > I really would like to hear from those of you who received the
> partials. 
> > > It 
> > > takes about an hour or two to wire them (assuming you already have
> your 
> > > jacks and switches on the panels). Simply install the Atom Pro
> development 
> > > 
> > > software on your Windows machine, connect the serial cable, apply
> power to 
> > > 
> > > the PSIM-1 (which is already programmed with either a four channel 
> > > chromatic 
> > > quantizer program or a sweep program; depends on which one I
> finished with 
> > > 
> > > during testing... I use about five different programs to test
> them). Open 
> > > up a program in the Basic Atom Pro software and hit the "Program"
> button 
> > > at 
> > > the top. That's all there is to it. There are over 100 programs on
> the CD 
> > > to get you started.
> > > 
> > > I'd recommend the following as a first program:
> > > psim-1-sample_and_hold-quantizer-demo.bas
> > > 
> > > Plug in a joystick or Noise source or VCO, LFO, or whatever to the
> inputs. 
> > > 
> > > You get four channels of S&H chromatically quantized CV at 160bpm
> (can be 
> > > changed in the code). Run the output to a VCO, filter, or anything
> else 
> > > you 
> > > want to control with quantized CV.
> > > 
> > > Not to sound too arrogant (I don't use that word lightly - it's 
> > > justifiable; 
> > > try it and you'll see)... but you'll find out the PSIM-1 is the
> *best* 
> > > quantizer, S&H, sequencer, etc. module ever built or conceived.
> Those of 
> > > you who have them already know this. The possibilities are
> endless... and 
> > > this is only the beginning!
> > > 
> > > Enjoy!
> > > - Brice
> > > http://www.SynthModules.com <http://www.synthmodules.com/>
> 
> > > 
> > > 
> > > ----- Original Message ----- 
> > > From: "Romeo Fahl" <rfahl@p...>
> > > To: <SynthModules@yahoogroups.com>
> > > Sent: Wednesday, August 17, 2005 3:08 PM
> > > Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING!
> > > 
> > > 
> > > > Got mine today. The wait is over! Thank you very much.
> > > >
> > > > Romeo
> > > >
> > > >
> > > > On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:
> > > >
> > > >> Hello everyone. Okay, I've began printing postage labels and
> getting
> > > >> the
> > > >> modules ready to ship. Partials will begin shipping tomorrow
> and the
> > > >> complete modules following shortly.
> > > >>
> > > >> IMPORTANT: I have received numerous emails from people who have
> > > >> claimed to
> > > >> have sent money to someone and I'm supposed to ship the module
> to them
> > > >> instead. Wonderful... huh? How am I supposed to know for sure? So,
> > > >> I will
> > > >> only ship to the *Original Purchaser* (except those who I made
> > > >> arrangements
> > > >> with at the beginning) and if you've sold your "place in line" or
> > > >> whatever... *you* can ship to your buyer. I can't get stuck in the
> > > >> middle.
> > > >> I know I've received a couple emails from a couple of you who have
> > > >> changed
> > > >> addresses. That's no problem (as long as I have confirmed I
> have the
> > > >> correct address). Otherwise, I will only ship to the address on the
> > > >> original PayPal transaction. I hope you all understand.
> > > >>
> > > >> Also, if any of you simply can NOT wait any longer and want me
> to ship
> > > >> the
> > > >> panels and PCBs so you can wire them up and test them... let me
> know.
> > > >> The
> > > >> boards are complete and the panels already have all the jacks,
> > > >> switches, and
> > > >> buttons installed. It's only a matter of connecting about a dozen
> > > >> wires and
> > > >> a ribbon cable and it's done. Otherwise, I'll be getting them
> shipped
> > > >> out
> > > >> probably two or three a week until they are all gone. I'm
> working two
> > > >> full-time jobs and spare time is rare. Otherwise... please have
> a bit
> > > >> more
> > > >> patience with me. I know this has been a long ride... and everyone
> > > >> has been
> > > >> *extremely* patient. That's one thing I love about the synth
> > > >> community.
> > > >> Those of you who know me personally know I am a man of my word. I
> > > >> have put
> > > >> a lot of blood, sweat, and tears into these modules. But those
> of you
> > > >> who
> > > >> already have them, and those of you that will start receiving
> them in
> > > >> the
> > > >> next couple days... will know it's worth the wait.
> > > >>
> > > >> Here are links to a couple photos showing all the modules:
> > > >>
> > > >>
> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> > > >>
> > > >>
> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> > > >>
> > > >> That's Larry's sitting on top... ready to go!
> > > >>
> > > >> If you have any questions, please contact me off-list.
> > > >>
> > > >> Best regards,
> > > >> Brice
> > > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> Be sure to check out the primary Web site at:
> > > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >>
> > > >> Yahoo! Groups Links
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > > Be sure to check out the primary Web site at:
> > > > http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > 
> > > 
> > > 
> > > 
> > > Be sure to check out the primary Web site at:
> > > http://www.SynthModules.com <http://www.synthmodules.com/>
> > > 
> > > 
> > > 
> > > 
> > > SPONSORED LINKS 
> > >   Moog
> synthesizer<http://groups.yahoo.com/gads?t=ms&k=Moog+synthesizer&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=YUxX-Tewr-98nNVh6uLTMg>
> 
> > >
> Paia<http://groups.yahoo.com/gads?t=ms&k=Paia&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=FFZNUlRfSxzOkP9tPCLvEA>
> 
> > >  ------------------------------
> > > YAHOO! GROUPS LINKS 
> > > 
> > > 
> > >    - Visit your group
> "SynthModules<http://groups.yahoo.com/group/SynthModules>" 
> > >    on the web.
> > >     - To unsubscribe from this group, send an email to:
> > >   
> SynthModules-unsubscribe@yahoogroups.com<SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> > >     - Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> > >    Service <http://docs.yahoo.com/info/terms/>. 
> > > 
> > > 
> > >  ------------------------------
> > > 
> > 
> > 
> > 
> > -- 
> >
> ----------------------------------------------------------------------------------
> > - Gear pictures at:
> http://jx.riscy.net/gallery/albums.php -
> > - -
> > - Music at: http://www.soundclick.com/trestrois -
> >
> ----------------------------------------------------------------------------------
> > 
> > 
> > [Non-text portions of this message have been removed]
> 
> 
> 
> 
> 
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
> 
> 
> 
> 
> ________________________________
> YAHOO! GROUPS LINKS 
> 
>  Visit your group "SynthModules" on the web.
>   
>  To unsubscribe from this group, send an email to:
>  SynthModules-unsubscribe@yahoogroups.com
>   
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
>  To unsubscribe from this group, send an email to:
>  SynthModules-unsubscribe@yahoogroups.com
>   
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
> ________________________________
> 


-- 
----------------------------------------------------------------------------------
- Gear pictures at: http://jx.riscy.net/gallery/albums.php -
-                                                                     
          -
- Music at:           http://www.soundclick.com/trestrois   -
----------------------------------------------------------------------------------

Are there any high quality toggle switches that would work well with 
the PSIM?  Preferrably something that Mouser carries.

Thank you!

Romeo

I use the NKK toggle switches similar to MOTM.  I like them real
well and they are quite reliable.  They are the 0.450" actuator
0.350" flatted switch currently on page 1132.pdf at Mouser.

I used DPDT momentaries for my PSIM to control both the Speakjet and
the PSIM (Mouser 633-M202802.  This link shows a photo.  Of course
for the standard PSIM you would only need the SPDT (Mouser
633-M201502).

http://modularsynthesis.com/modules/synthmodules/synthmodules.htm

Dave

--- In SynthModules@yahoogroups.com, Romeo Fahl <rfahl@p...> wrote:
> Are there any high quality toggle switches that would work well
with 

> the PSIM?  Preferrably something that Mouser carries.
> 
> Thank you!
> 
> Romeo

--- In SynthModules@yahoogroups.com, "Brice D. Hornback"
<synthmodules@s...> wrote:
> Don't be alarmed.  Those who ordered the "partials" will be
> receiving shipping confirmations starting Monday. "Complete"
> modules will follow shortly.
> 
> More updates later...
> 
> - Brice

Hi Brice,

How are things?

- Colin Hinz
  Toronto, Canada

Colin,

Not so well.  I've been wanting to give an update for the last few
days but haven't been up to it.  I've been pretty sick for the last 4
weeks running a fairly high fever and almost hospitalized.  I'm doing
better now, but I still haven't gone back to work yet and really can't
do much.  A few more days and I should be back on my feet and able to
work on the modules again.  Anyway, right now I'm supposed to be resting.

I'm a little surprised we haven't heard from all those that got their
partials several weeks ago.  Has anyone gotten them behind the Stooge
MOTOM panel and running yet?  I'd love to hear something and see some
photos.

More later...
- Brice
http://www.SynthModules.com 

--- In SynthModules@yahoogroups.com, "telharmonium06" <asfi@e...> wrote:

> --- In SynthModules@yahoogroups.com, "Brice D. Hornback"
> <synthmodules@s...> wrote:
> > Don't be alarmed.  Those who ordered the "partials" will be
> > receiving shipping confirmations starting Monday. "Complete"
> > modules will follow shortly.
> > 
> > More updates later...
> > 
> > - Brice
> 
> Hi Brice,
> 
> How are things?
> 
> - Colin Hinz
>   Toronto, Canada

Has anybody got theirs yet?

On ***14/08/05***, Brice D. Hornback <synthmodules@synthmodules.com> wrote:
> Hello everyone.  Okay, I've began printing postage labels and getting the
> modules ready to ship.  Partials will begin shipping tomorrow and the
> complete modules following shortly.
>

Yes, many people have received them.  As several of you know, I have
been in and out of the hospital due to illness.  I'm getting them out
as fast as I can.

I recently received an email from someone who doesn't believe I have
shipped any.  Would those of you who have received them please speak
up and let those know who are still waiting that they are real?  I am
working on them anytime I can...

I would also like to see some photos of the "partials" that are being
built behind the Stooge (and other) panels.  I shipped a lot of
partials... but haven't heard from anyone since.

Thanks,

Brice
http://www.SynthModules.com 

--- In SynthModules@yahoogroups.com, ac <analoghell@g...> wrote:
>
> Has anybody got theirs yet?
> 
> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> > Hello everyone.  Okay, I've began printing postage labels and
getting the

> > modules ready to ship.  Partials will begin shipping tomorrow and the
> > complete modules following shortly.
> >
>

FWIW: I got my partial a couple of months ago.

Might be good to post a spreadsheet of whose has shipped (and when?), 
whose is in the works and what their place in line is.   Might take 
some of the mystery out of what's going on.

Romeo

On Dec 15, 2005, at 8:48 PM, synthmodules wrote:

> Yes, many people have received them.  As several of you know, I have
> been in and out of the hospital due to illness.  I'm getting them out
> as fast as I can.
>
> I recently received an email from someone who doesn't believe I have
> shipped any.  Would those of you who have received them please speak
> up and let those know who are still waiting that they are real?  I am
> working on them anytime I can...
>
> I would also like to see some photos of the "partials" that are being
> built behind the Stooge (and other) panels.  I shipped a lot of
> partials... but haven't heard from anyone since.
>
> Thanks,
>
> Brice
> http://www.SynthModules.com
>
> --- In SynthModules@yahoogroups.com, ac <analoghell@g...> wrote:
>>
>> Has anybody got theirs yet?
>>
>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
>>> Hello everyone.  Okay, I've began printing postage labels and
> getting the
>>> modules ready to ship.  Partials will begin shipping tomorrow and the
>>> complete modules following shortly.
>>>
>>
>
>
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

I received mine in August, as did Larry Hendry. Mine is still waiting
to be mounted behind its Stooge panel however. I had anticipated
having it up and running by now, but got sidetracked with Larry's death.

As a testament to the popularity of this module, I recently sold
Larry's unbuilt module projects, including his PSIM/stooge panel. It
was by far the most requested module. I could have sold 8 of them if I
had them available.

Moe
http://www.hotrodmotm.com
http://www.wiseguysynth.com

--- In SynthModules@yahoogroups.com, "synthmodules"
<synthmodules@s...> wrote:
>
> Yes, many people have received them.  As several of you know, I have
> been in and out of the hospital due to illness.  I'm getting them out
> as fast as I can.
> 
> I recently received an email from someone who doesn't believe I have
> shipped any.  Would those of you who have received them please speak
> up and let those know who are still waiting that they are real?  I am
> working on them anytime I can...
> 
> I would also like to see some photos of the "partials" that are being
> built behind the Stooge (and other) panels.  I shipped a lot of
> partials... but haven't heard from anyone since.
> 
> Thanks,
> 
> Brice
> http://www.SynthModules.com 
> 
> --- In SynthModules@yahoogroups.com, ac <analoghell@g...> wrote:
> >
> > Has anybody got theirs yet?
> > 
> > On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> > > Hello everyone.  Okay, I've began printing postage labels and
> getting the
> > > modules ready to ship.  Partials will begin shipping tomorrow
and the

> > > complete modules following shortly.
> > >
> >
>

i've not got my partial yet - who else ?
cheers
paul b
sheffield / uk

>>> Has anybody got theirs yet?
>>>
>>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
>>>> Hello everyone.  Okay, I've began printing postage labels and
>> getting the
>>>> modules ready to ship.  Partials will begin shipping tomorrow
> and the
>>>> complete modules following shortly.
>>>>
>>>
>>
>
>
>
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor -------------------- 
> ~-->
> Know an art & music fan? Make a donation in their honor this  
> holiday season!
> http://us.click.yahoo.com/VwqHaC/.VHMAA/n1hLAA/QnLolB/TM
> -------------------------------------------------------------------- 
> ~->
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

haven't received my completed module in japan yet, and my emails to
the addresses on the synthmodules.com website, and the email address
brice has been using more recently, have gone unanswered. 

nearly two years, and still waiting...

gregg.

> i've not got my partial yet - who else ?
> cheers
> paul b
> sheffield / uk
> 
> >>> Has anybody got theirs yet?
> >>>
> >>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> >>>> Hello everyone.  Okay, I've began printing postage labels and
> >> getting the
> >>>> modules ready to ship.  Partials will begin shipping tomorrow
> > and the
> >>>> complete modules following shortly.

I'm still working on them.  Not sure why I never got your email(s)? Gregg. 
Another set will be shipping in the next few days.  I'm working my way down 
the list.  Yes, I know it's taken a while.

- Brice
http://www.SynthModules.com

----- Original Message ----- 

From: "mrboningen" <darkflametwentythree@hotmail.com>
To: <SynthModules@yahoogroups.com>
Sent: Sunday, December 18, 2005 10:23 AM
Subject: [SynthModules] Re: SynthModule PSIM-1's are SHIPPING!


> haven't received my completed module in japan yet, and my emails to
> the addresses on the synthmodules.com website, and the email address
> brice has been using more recently, have gone unanswered.
>
> nearly two years, and still waiting...
>
> gregg.
>
>> i've not got my partial yet - who else ?
>> cheers
>> paul b
>> sheffield / uk
>>
>> >>> Has anybody got theirs yet?
>> >>>
>> >>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
>> >>>> Hello everyone.  Okay, I've began printing postage labels and
>> >> getting the
>> >>>> modules ready to ship.  Partials will begin shipping tomorrow
>> > and the
>> >>>> complete modules following shortly.
>
>
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

ok brice,

thanks for the update! looking forward to getting the module, sorry
for  nagging!

best wishes,

gregg.

--- In SynthModules@yahoogroups.com, "Brice D. Hornback"
<synthmodules@s...> wrote:
>
> I'm still working on them.  Not sure why I never got your email(s)?
Gregg. 
> Another set will be shipping in the next few days.  I'm working my
way down 

> the list.  Yes, I know it's taken a while.
> 
> - Brice
> http://www.SynthModules.com
> 
> ----- Original Message ----- 
> From: "mrboningen" <darkflametwentythree@h...>
> To: <SynthModules@yahoogroups.com>
> Sent: Sunday, December 18, 2005 10:23 AM
> Subject: [SynthModules] Re: SynthModule PSIM-1's are SHIPPING!
> 
> 
> > haven't received my completed module in japan yet, and my emails to
> > the addresses on the synthmodules.com website, and the email address
> > brice has been using more recently, have gone unanswered.
> >
> > nearly two years, and still waiting...
> >
> > gregg.
> >
> >> i've not got my partial yet - who else ?
> >> cheers
> >> paul b
> >> sheffield / uk
> >>
> >> >>> Has anybody got theirs yet?
> >> >>>
> >> >>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> >> >>>> Hello everyone.  Okay, I've began printing postage labels and
> >> >> getting the
> >> >>>> modules ready to ship.  Partials will begin shipping tomorrow
> >> > and the
> >> >>>> complete modules following shortly.
> >
> >
> >
> >
> >
> >
> > Be sure to check out the primary Web site at:
> > http://www.SynthModules.com
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>

I'm still waiting for my completed module that was ordered Feb. 19 2004.  
When did you guys place your orders?  I was just currious to see if partials 
that were shipped out were ordered after the completed versions were sold 
and if they shipped out before.

>From: "mrboningen" <darkflametwentythree@hotmail.com>
>Reply-To: SynthModules@yahoogroups.com
>To: SynthModules@yahoogroups.com
>Subject: [SynthModules] Re: SynthModule PSIM-1's are SHIPPING!
>Date: Sun, 18 Dec 2005 15:23:40 -0000
>
>haven't received my completed module in japan yet, and my emails to
>the addresses on the synthmodules.com website, and the email address
>brice has been using more recently, have gone unanswered.
>
>nearly two years, and still waiting...
>
>gregg.
>
> > i've not got my partial yet - who else ?
> > cheers
> > paul b
> > sheffield / uk
> >
> > >>> Has anybody got theirs yet?
> > >>>
> > >>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> > >>>> Hello everyone.  Okay, I've began printing postage labels and
> > >> getting the
> > >>>> modules ready to ship.  Partials will begin shipping tomorrow
> > > and the
> > >>>> complete modules following shortly.
>
>
>

I can answer that question.  I populated and soldered all the PCBs at
once (except the LED PCBs as I explained earlier how much time it
takes to hand-match all the LEDs).  So yes, the partials shipped
before the completed modules.  They are however being sent out in the
order received.  So, if you were last to order a complete module,
you'll be the last to receive one.  It didn't make much sense to keep
a bunch of boards laying around when I could ship the partials.  I
hope that makes sense as to why the partials have already shipped
(except two remaining -- one to the UK and one to Japan which will be
the next to go out).  Lately, Andrew and I have been working on power
cables and I've been matching LEDs.  There really isn't much more to
do to them to complete them (basically just wiring up the jacks and
switches, testing, etc... and it is easier to do several at a time
rather than like how I started which was builing one at a time until
it was complete and then starting the next.

Make sense?

- Brice
http://www.SynthModules.com 

--- In SynthModules@yahoogroups.com, "Andris Tauvers" <aba81102@h...>
wrote:
>
> I'm still waiting for my completed module that was ordered Feb. 19
2004.  
> When did you guys place your orders?  I was just currious to see if
partials 
> that were shipped out were ordered after the completed versions were
sold 

> and if they shipped out before.
> 
> 
> >From: "mrboningen" <darkflametwentythree@h...>
> >Reply-To: SynthModules@yahoogroups.com
> >To: SynthModules@yahoogroups.com
> >Subject: [SynthModules] Re: SynthModule PSIM-1's are SHIPPING!
> >Date: Sun, 18 Dec 2005 15:23:40 -0000
> >
> >haven't received my completed module in japan yet, and my emails to
> >the addresses on the synthmodules.com website, and the email address
> >brice has been using more recently, have gone unanswered.
> >
> >nearly two years, and still waiting...
> >
> >gregg.
> >
> > > i've not got my partial yet - who else ?
> > > cheers
> > > paul b
> > > sheffield / uk
> > >
> > > >>> Has anybody got theirs yet?
> > > >>>
> > > >>> On ***14/08/05***, Brice D. Hornback <synthmodules@s...> wrote:
> > > >>>> Hello everyone.  Okay, I've began printing postage labels and
> > > >> getting the
> > > >>>> modules ready to ship.  Partials will begin shipping tomorrow
> > > > and the
> > > >>>> complete modules following shortly.
> >
> >
> >
>

hey brice, 

i was just wondering if that's mine you're refering too? i hope not,
as i ordered a completed module!

best wishes,

gregg.

--- In SynthModules@yahoogroups.com, "synthmodules"
<synthmodules@s...> wrote:

> I hope that makes sense as to why the partials have already shipped
> (except two remaining -- one to the UK and one to Japan which will be
> the next to go out).  
>
> - Brice
> http://www.SynthModules.com

well i'm assuming the uk one is mine...
cheers
paul
sheffield
uk

On 22 Dec 2005, at 00:56, mrboningen wrote:

> hey brice,
>
> i was just wondering if that's mine you're refering too? i hope not,
> as i ordered a completed module!
>
> best wishes,
>
> gregg.
>
> --- In SynthModules@yahoogroups.com, "synthmodules"
> <synthmodules@s...> wrote:
>
>> I hope that makes sense as to why the partials have already shipped
>> (except two remaining -- one to the UK and one to Japan which will be
>> the next to go out).
>>
>> - Brice
>> http://www.SynthModules.com
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor -------------------- 
> ~-->
> Know an art & music fan? Make a donation in their honor this  
> holiday season!
> http://us.click.yahoo.com/VwqHaC/.VHMAA/n1hLAA/QnLolB/TM
> -------------------------------------------------------------------- 
> ~->
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>
>