Ok that's cool.
Put me on the list for 2!
Regards,
Dennis
On 8/21/05, synthmodules <synthmodules@synthmodules.com> wrote:
> Dennis,
>
> There will be more PSIM-1 modules available.
>
> But first, I need to finish this current batch. I have a couple other
> ideas to compliment the PSIM-1 as well. Besides a MIDI module, I also
> see a plug-in white noise generator daughter board. I should have
> included that in the original design. We'll all talk about what's
> next once these are all shipped.
>
> - Brice
> http://www.SynthModules.com
>
>
> --- In SynthModules@yahoogroups.com, Dennis Verschoor <modular@g...>
> wrote:
> > So Brice
> > Gonna do another batch after these?
> >
> > Regards,.
> >
> > Dennis
> >
> > On 8/21/05, Brice D. Hornback <synthmodules@s...> wrote:
> > >
> > > Has anyone who received the partials I shipped wired them up yet?
> I still
> > > have a few more partials to ship and I'll be working on getting those
> > > finished up today... but it'll probably be sometime next week. I
> had two
> > > of
> > > the modules that I'm not satisfied with... so, I'll be replacing
> the DAC
> > > on
> > > both of them. By the way, polarity of an electrolytic *really does
> > > matter*!
> > > hehe Yep, even I make a mistake once in a while. I put one of the
> little
> > > power regulator caps in backwards. My wife was standing next to me
> when I
> > > powered it up. It was quite the little pop and scared the crap out
> of her.
> > >
> > > It didn't affect the module at all... but was a bit startling. So,
> yes...
> > > I
> > > let the smoke out of one of the PSIM-1 modules. I guess a project
> just
> > > can't be completed without that happening at least once. Now I can
> get
> > > these finished. :)
> > >
> > > Anyway, testing the partials takes about ten times as long as the
> > > completed
> > > modules (no jacks to plug into or switches to push)... and I can't
> wait
> > > until these final few are gone. ;) Then on to the fully assembled.
> Not
> > > too much longer...
> > >
> > > I really would like to hear from those of you who received the
> partials.
> > > It
> > > takes about an hour or two to wire them (assuming you already have
> your
> > > jacks and switches on the panels). Simply install the Atom Pro
> development
> > >
> > > software on your Windows machine, connect the serial cable, apply
> power to
> > >
> > > the PSIM-1 (which is already programmed with either a four channel
> > > chromatic
> > > quantizer program or a sweep program; depends on which one I
> finished with
> > >
> > > during testing... I use about five different programs to test
> them). Open
> > > up a program in the Basic Atom Pro software and hit the "Program"
> button
> > > at
> > > the top. That's all there is to it. There are over 100 programs on
> the CD
> > > to get you started.
> > >
> > > I'd recommend the following as a first program:
> > > psim-1-sample_and_hold-quantizer-demo.bas
> > >
> > > Plug in a joystick or Noise source or VCO, LFO, or whatever to the
> inputs.
> > >
> > > You get four channels of S&H chromatically quantized CV at 160bpm
> (can be
> > > changed in the code). Run the output to a VCO, filter, or anything
> else
> > > you
> > > want to control with quantized CV.
> > >
> > > Not to sound too arrogant (I don't use that word lightly - it's
> > > justifiable;
> > > try it and you'll see)... but you'll find out the PSIM-1 is the
> *best*
> > > quantizer, S&H, sequencer, etc. module ever built or conceived.
> Those of
> > > you who have them already know this. The possibilities are
> endless... and
> > > this is only the beginning!
> > >
> > > Enjoy!
> > > - Brice
> > > http://www.SynthModules.com <http://www.synthmodules.com/>
>
> > >
> > >
> > > ----- Original Message -----
> > > From: "Romeo Fahl" <rfahl@p...>
> > > To: <SynthModules@yahoogroups.com>
> > > Sent: Wednesday, August 17, 2005 3:08 PM
> > > Subject: Re: [SynthModules] SynthModule PSIM-1's are SHIPPING!
> > >
> > >
> > > > Got mine today. The wait is over! Thank you very much.
> > > >
> > > > Romeo
> > > >
> > > >
> > > > On Aug 14, 2005, at 4:07 PM, Brice D. Hornback wrote:
> > > >
> > > >> Hello everyone. Okay, I've began printing postage labels and
> getting
> > > >> the
> > > >> modules ready to ship. Partials will begin shipping tomorrow
> and the
> > > >> complete modules following shortly.
> > > >>
> > > >> IMPORTANT: I have received numerous emails from people who have
> > > >> claimed to
> > > >> have sent money to someone and I'm supposed to ship the module
> to them
> > > >> instead. Wonderful... huh? How am I supposed to know for sure? So,
> > > >> I will
> > > >> only ship to the *Original Purchaser* (except those who I made
> > > >> arrangements
> > > >> with at the beginning) and if you've sold your "place in line" or
> > > >> whatever... *you* can ship to your buyer. I can't get stuck in the
> > > >> middle.
> > > >> I know I've received a couple emails from a couple of you who have
> > > >> changed
> > > >> addresses. That's no problem (as long as I have confirmed I
> have the
> > > >> correct address). Otherwise, I will only ship to the address on the
> > > >> original PayPal transaction. I hope you all understand.
> > > >>
> > > >> Also, if any of you simply can NOT wait any longer and want me
> to ship
> > > >> the
> > > >> panels and PCBs so you can wire them up and test them... let me
> know.
> > > >> The
> > > >> boards are complete and the panels already have all the jacks,
> > > >> switches, and
> > > >> buttons installed. It's only a matter of connecting about a dozen
> > > >> wires and
> > > >> a ribbon cable and it's done. Otherwise, I'll be getting them
> shipped
> > > >> out
> > > >> probably two or three a week until they are all gone. I'm
> working two
> > > >> full-time jobs and spare time is rare. Otherwise... please have
> a bit
> > > >> more
> > > >> patience with me. I know this has been a long ride... and everyone
> > > >> has been
> > > >> *extremely* patient. That's one thing I love about the synth
> > > >> community.
> > > >> Those of you who know me personally know I am a man of my word. I
> > > >> have put
> > > >> a lot of blood, sweat, and tears into these modules. But those
> of you
> > > >> who
> > > >> already have them, and those of you that will start receiving
> them in
> > > >> the
> > > >> next couple days... will know it's worth the wait.
> > > >>
> > > >> Here are links to a couple photos showing all the modules:
> > > >>
> > > >>
> http://www.synthmodules.com/images/psim-1-batch_a.jpg
> > > >>
> > > >>
> http://www.synthmodules.com/images/psim-1-batch_b.jpg
> > > >>
> > > >> That's Larry's sitting on top... ready to go!
> > > >>
> > > >> If you have any questions, please contact me off-list.
> > > >>
> > > >> Best regards,
> > > >> Brice
> > > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> Be sure to check out the primary Web site at:
> > > >> http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >>
> > > >> Yahoo! Groups Links
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > > Be sure to check out the primary Web site at:
> > > > http://www.SynthModules.com <http://www.synthmodules.com/>
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > Be sure to check out the primary Web site at:
> > > http://www.SynthModules.com <http://www.synthmodules.com/>
> > >
> > >
> > >
> > >
> > > SPONSORED LINKS
> > > Moog
> synthesizer<http://groups.yahoo.com/gads?t=ms&k=Moog+synthesizer&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=YUxX-Tewr-98nNVh6uLTMg>
>
> > >
> Paia<http://groups.yahoo.com/gads?t=ms&k=Paia&w1=Moog+synthesizer&w2=Paia&c=2&s=32&.sig=FFZNUlRfSxzOkP9tPCLvEA>
>
> > > ------------------------------
> > > YAHOO! GROUPS LINKS
> > >
> > >
> > > - Visit your group
> "SynthModules<http://groups.yahoo.com/group/SynthModules>"
> > > on the web.
> > > - To unsubscribe from this group, send an email to:
> > >
> SynthModules-unsubscribe@yahoogroups.com<SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> > > - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/>.
> > >
> > >
> > > ------------------------------
> > >
> >
> >
> >
> > --
> >
> ----------------------------------------------------------------------------------
> > - Gear pictures at:
> http://jx.riscy.net/gallery/albums.php -
> > - -
> > - Music at: http://www.soundclick.com/trestrois -
> >
> ----------------------------------------------------------------------------------
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
>
>
>
> ________________________________
> YAHOO! GROUPS LINKS
>
> Visit your group "SynthModules" on the web.
>
> To unsubscribe from this group, send an email to:
> SynthModules-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> To unsubscribe from this group, send an email to:
> SynthModules-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> ________________________________
>
--
----------------------------------------------------------------------------------
- Gear pictures at: http://jx.riscy.net/gallery/albums.php -
-
-
- Music at: http://www.soundclick.com/trestrois -
----------------------------------------------------------------------------------Message
Re: [SynthModules] Re: SynthModule PSIM-1's are SHIPPING!
2005-08-21 by Dennis Verschoor