SynthModules

Ok, here's the promised update:
* all the led boards for the faceplates are done
* all the PSIM boards are soldered
* 7 faceplates have the ground wires done and are ready to attach to
psim's (we should get most of these done next week)
* 4 are fully wired and will ship to the next people on the list during
this coming week.  These module still requires calibration and testing
therefore they will probably not all ship Monday. but you should hear from
Brice if yours will ship.

I spent most of the day working on the LED boards, while Brice was
matching LED's, this process actually takes longer than soldering them
onto the board.  Once we finished those we moved on to the face plates and
were able to finish several of those.

Gary, as your board has a specific configuration I can give you a status
update on it.  The front panel grounds are wired, and the board itself is
complete.  The LED's are mounted on the front panel but we still have to
put the front panel and the board together... (now where did those damn
standoffs go?)  Once the board is mated with the faceplate it will still
require calibration and testing but should be shipping soon.

-- 
Andrew D Kirch  |       Abusive Hosts Blocking List      | www.ahbl.org
Security Admin  |  Summit Open Source Development Group  | www.sosdg.org
Key At http://www.2mbit.com/~trelane/trelane.key
Key fingerprint = B4C2 8083 648B 37A2 4CCE  61D3 16D6 995D 026F 20CF