you Can simply snip the wire to earth if you like, or ad a switch as a ground lifter.
More about the subject here
http://www.cyndustries.com/modules_powerdist-FAQ.cfm
Best Wishes!
Cynthia
http://launch.groups.yahoo.com/group/The_Cyndustries_List/
electronicpressskit wrote:
So today I was using my Modcan/Cynthia system and cross patching with my Driscoll/Serge system and ran into some grounding issues.
The Modcan/Cynthia rig is powered with a Cynthia Major PSU and the Serge/Driscoll rig is powered with a power-one supply I got from ebay and wired up myself.
On the PSU I wired, I took the signal ground to my ground jack to use when connecting to other PSU's. Upon examining the Major PSU I found that the grounding jack is connected to the PSU chassis and the earth ground.
After discovering this I remembered I had a Serge PS6 in my closet so I opened it up and the ground jack is indeed connected to the signal ground.
I'm wondering if this is how the Cynthia PSU is supposed to be wired? I can't figure out how it makes sense to wire it that way.
Anyone have an explanation?
epk