Yahoo Groups archive

The Cyndustries List

Index last updated: 2026-04-28 23:14 UTC

Thread

ZOe status

ZOe status

2008-05-22 by Chris Muir

Hi Cynthia,

Any status you can report on the Buchla ZOe?

Thanks,
Chris

Chris Muir
cbm@well.com	
http://www.xfade.com

Re: [The_Cyndustries_List] ZOe status

2008-05-22 by jon schatz

On May 22, 2008, at 10:42 AM, Chris Muir wrote:
> Any status you can report on the Buchla ZOe?


also, is the run sold out?

thanks,

-jon
"There are no differences but differences of degree between different  
degrees
of difference and no difference."
- James, William. "Subjective Effects of Nitrous Oxide." Mind. 1882;  
Vol 7.

Re: [The_Cyndustries_List] ZOe status

2008-05-22 by Cynthia Webster

No real news on the ZOe lately except that
we had some PCB software compatibility
problems to deal with which held back the
circuit board run, (but then that may be ok
really because we decided to make a larger
run of circuit boards after all).

I've been concentrating on building and
shipping as many back-ordered items as
possible for the past two or three weeks
and now that most of it has shipped I can
finally get back to R&D and design,
(sort of a yin/yang cycle I guess).

We're getting there!

Cynthia

http://www.cyndustries.com/




jon schatz wrote:
Show quoted textHide quoted text
>
>
> On May 22, 2008, at 10:42 AM, Chris Muir wrote:
> > Any status you can report on the Buchla ZOe?
>
> also, is the run sold out?
>
> thanks,
>
> -jon
>
> Messages in this topic 
> <http://groups.yahoo.com/group/The_Cyndustries_List/message/1155;_ylc=X3oDMTM1Z3JqaWxuBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARtc2dJZAMxMTkyBHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTIxMTQ3ODMzMQR0cGNJZAMxMTU1> 
> (3) Reply (via web post) 
> <http://groups.yahoo.com/group/The_Cyndustries_List/post;_ylc=X3oDMTJxcGVnYWg5BF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARtc2dJZAMxMTkyBHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTIxMTQ3ODMzMQ--?act=reply&messageNum=1192> 
> | Start a new topic 
> <http://groups.yahoo.com/group/The_Cyndustries_List/post;_ylc=X3oDMTJmODd2NXBvBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEyMTE0NzgzMzE-> 
>
> Messages 
> <http://groups.yahoo.com/group/The_Cyndustries_List/messages;_ylc=X3oDMTJmZGVhbnRlBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNtc2dzBHN0aW1lAzEyMTE0NzgzMzE-> 
> | Files 
> <http://groups.yahoo.com/group/The_Cyndustries_List/files;_ylc=X3oDMTJncmVnc3I1BF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNmaWxlcwRzdGltZQMxMjExNDc4MzMx> 
> | Photos 
> <http://groups.yahoo.com/group/The_Cyndustries_List/photos;_ylc=X3oDMTJmdGpiNXRpBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNwaG90BHN0aW1lAzEyMTE0NzgzMzE-> 
> | Links 
> <http://groups.yahoo.com/group/The_Cyndustries_List/links;_ylc=X3oDMTJnajFrNDAzBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNsaW5rcwRzdGltZQMxMjExNDc4MzMx> 
> | Database 
> <http://groups.yahoo.com/group/The_Cyndustries_List/database;_ylc=X3oDMTJkMms4YXRuBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNkYgRzdGltZQMxMjExNDc4MzMx> 
> | Polls 
> <http://groups.yahoo.com/group/The_Cyndustries_List/polls;_ylc=X3oDMTJnYWIzNWcyBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNwb2xscwRzdGltZQMxMjExNDc4MzMx> 
> | Members 
> <http://groups.yahoo.com/group/The_Cyndustries_List/members;_ylc=X3oDMTJmaWFlN3EzBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNtYnJzBHN0aW1lAzEyMTE0NzgzMzE-> 
> | Calendar 
> <http://groups.yahoo.com/group/The_Cyndustries_List/calendar;_ylc=X3oDMTJlbWZvYnMwBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNjYWwEc3RpbWUDMTIxMTQ3ODMzMQ--> 
>
> Yahoo! Groups 
> <http://groups.yahoo.com/;_ylc=X3oDMTJlODVyamJjBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTIxMTQ3ODMzMQ--> 
>
> Change settings via the Web 
> <http://groups.yahoo.com/group/The_Cyndustries_List/join;_ylc=X3oDMTJncm1zOGszBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNzdG5ncwRzdGltZQMxMjExNDc4MzMx> 
> (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest 
> <mailto:The_Cyndustries_List-digest@yahoogroups.com?subject=Email%20Delivery:%20Digest> 
> | Switch format to Traditional 
> <mailto:The_Cyndustries_List-traditional@yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional> 
>
> Visit Your Group 
> <http://groups.yahoo.com/group/The_Cyndustries_List;_ylc=X3oDMTJlZjE2YjZwBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNocGYEc3RpbWUDMTIxMTQ3ODMzMQ--> 
> | Yahoo! Groups Terms of Use <http://docs.yahoo.com/info/terms/> | 
> Unsubscribe 
> <mailto:The_Cyndustries_List-unsubscribe@yahoogroups.com?subject=>
> Recent Activity
>
>    *
>        3
>       New Members
>       <http://groups.yahoo.com/group/The_Cyndustries_List/members;_ylc=X3oDMTJnMTRtZGwwBF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxMjExNDc4MzMx>
>
> Visit Your Group 
> <http://groups.yahoo.com/group/The_Cyndustries_List;_ylc=X3oDMTJmMXE1Zzl0BF9TAzk3MzU5NzE0BGdycElkAzE2NzY2NDExBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEyMTE0NzgzMzE-> 
>
> Yahoo! News
>
> Kevin Sites 
> <http://us.ard.yahoo.com/SIG=13oivbttl/M=493064.12016309.12445701.8674578/D=grplch/S=1707709864:NC/Y=YAHOO/EXP=1211485532/L=/B=nlo9AkLaX.g-/J=1211478332005156/A=3848607/R=0/SIG=10q7s9jm5/*http://hotzone.yahoo.com>
>
> Get coverage of
>
> world crises.
>
> Need traffic?
>
> Drive customers 
> <http://us.ard.yahoo.com/SIG=13o073qrj/M=493064.12016308.12445700.8674578/D=grplch/S=1707709864:NC/Y=YAHOO/EXP=1211485532/L=/B=n1o9AkLaX.g-/J=1211478332005156/A=3848644/R=0/SIG=131l83flq/*http://searchmarketing.yahoo.com/arp/srchv2.php?o=US2006&cmp=Yahoo&ctv=Groups5&s=Y&s2=&s3=&b=50>
>
> With search ads
>
> on Yahoo!
>
> Learn to live
>
> a full life with these 
> <http://us.ard.yahoo.com/SIG=13o3k5r6a/M=493064.12662709.12980595.8674578/D=grplch/S=1707709864:NC/Y=YAHOO/EXP=1211485532/L=/B=oFo9AkLaX.g-/J=1211478332005156/A=5349281/R=0/SIG=11ks6tatn/*http://advision.webevents.yahoo.com/HealthyLiving/>
>
> healthy living
>
> groups on Yahoo!
>
> .
>
>

Re: ZOe status/modcan QLPG status

2008-09-16 by dayjob111

any update on the modcan QLPG's that will honorably reside in my bruce duncan modcan 
case?

thanks

steve w.

--- In The_Cyndustries_List@yahoogroups.com, Cynthia Webster <cynthia.webster@...> 
wrote:
Show quoted textHide quoted text
>
> We've had a few serious ZOe challenges lately,
> for example we have some absolutely stunning
>  circuit boards here and I'm happy to say that
> they fit the front panel and all of the components
>  perfectly, there's just one thing however...
> The 50-pin main connector was laid out in a
> mirror image of what it was supposed to be,
> (which is a fancy way of saying it was totally
> Backwards!)
> 
> Another surprise is that we somehow misjudged
> the depth of the entire assembly and after
> assembling one completely we found it to be a
> half inch too deep to fit the Buchla boats, (metal
> enclosures).
> 
> This all seemed like a serious set-back until we
> thought through the situation and realized that by
> swapping around a few components we might
> actually be ok if we use a 50-pin IDC ribbon
> cable assembly in place of a circuit board, and
> put a flip in the cable to correct the reversed
> connector.  We believe this would also solve the
>  depth problem, so I had to research and order
> new part numbers and we're presently putting
> the pieces together very methodically to be sure
> we get it right. 
> 
> We want to get everything absolutely perfect
> because after all... these are going into ~Buchla~
> cabinets, and it will be an honor to have them
> along side Don's finest.
> 
> 
> Cynthia
> 
> http://www.cyndustries.com/
> 
> 
> 
> Chris Muir wrote:
> >
> > On May 22, 2008, at 11:01 AM, Cynthia Webster wrote:
> >
> >> We're getting there!
> >
> >
> > It's been a while sin e we got an update. What is the current status?
> >
> > -C
> >
> > Chris Muir
> > cbm@...   
> > http://www.xfade.com
> >
> >
> >
> >
> >
> >
> >
>

Re: [The_Cyndustries_List] ZOe status

2008-09-16 by Chris Muir

On May 22, 2008, at 11:01 AM, Cynthia Webster wrote:

> We're getting there!


It's been a while sin e we got an update. What is the current status?

-C

Chris Muir
cbm@well.com	
http://www.xfade.com

Re: [The_Cyndustries_List] ZOe status

2008-09-16 by Cynthia Webster

We've had a few serious ZOe challenges lately,
for example we have some absolutely stunning
 circuit boards here and I'm happy to say that
they fit the front panel and all of the components
 perfectly, there's just one thing however...
The 50-pin main connector was laid out in a
mirror image of what it was supposed to be,
(which is a fancy way of saying it was totally
Backwards!)

Another surprise is that we somehow misjudged
the depth of the entire assembly and after
assembling one completely we found it to be a
half inch too deep to fit the Buchla boats, (metal
enclosures).

This all seemed like a serious set-back until we
thought through the situation and realized that by
swapping around a few components we might
actually be ok if we use a 50-pin IDC ribbon
cable assembly in place of a circuit board, and
put a flip in the cable to correct the reversed
connector.  We believe this would also solve the
 depth problem, so I had to research and order
new part numbers and we're presently putting
the pieces together very methodically to be sure
we get it right. 

We want to get everything absolutely perfect
because after all... these are going into ~Buchla~
cabinets, and it will be an honor to have them
along side Don's finest.


Cynthia

http://www.cyndustries.com/



Chris Muir wrote:
Show quoted textHide quoted text
>
> On May 22, 2008, at 11:01 AM, Cynthia Webster wrote:
>
>> We're getting there!
>
>
> It's been a while sin e we got an update. What is the current status?
>
> -C
>
> Chris Muir
> cbm@well.com   
> http://www.xfade.com
>
>
>
>
>
>
>

Re: [The_Cyndustries_List] Re: ZOe status/modcan QLPG status

2008-09-16 by Cynthia Webster

No Update Yet

Best Wishes!

Cynthia

dayjob111 wrote:
Show quoted textHide quoted text
>
> any update on the modcan QLPG's that will honorably reside in my bruce 
> duncan modcan
> case?
>
> thanks
>
> steve w.
>
> --- In The_Cyndustries_List@yahoogroups.com 
> <mailto:The_Cyndustries_List%40yahoogroups.com>, Cynthia Webster 
> <cynthia.webster@...>
> wrote:
> >
> > We've had a few serious ZOe challenges lately,
> > for example we have some absolutely stunning
> > circuit boards here and I'm happy to say that
> > they fit the front panel and all of the components
> > perfectly, there's just one thing however...
> > The 50-pin main connector was laid out in a
> > mirror image of what it was supposed to be,
> > (which is a fancy way of saying it was totally
> > Backwards!)
> >
> > Another surprise is that we somehow misjudged
> > the depth of the entire assembly and after
> > assembling one completely we found it to be a
> > half inch too deep to fit the Buchla boats, (metal
> > enclosures).
> >
> > This all seemed like a serious set-back until we
> > thought through the situation and realized that by
> > swapping around a few components we might
> > actually be ok if we use a 50-pin IDC ribbon
> > cable assembly in place of a circuit board, and
> > put a flip in the cable to correct the reversed
> > connector. We believe this would also solve the
> > depth problem, so I had to research and order
> > new part numbers and we're presently putting
> > the pieces together very methodically to be sure
> > we get it right.
> >
> > We want to get everything absolutely perfect
> > because after all... these are going into ~Buchla~
> > cabinets, and it will be an honor to have them
> > along side Don's finest.
> >
> >
> > Cynthia
> >
> > http://www.cyndustries.com/ <http://www.cyndustries.com/>
> >
> >
> >
> > Chris Muir wrote:
> > >
> > > On May 22, 2008, at 11:01 AM, Cynthia Webster wrote:
> > >
> > >> We're getting there!
> > >
> > >
> > > It's been a while sin e we got an update. What is the current status?
> > >
> > > -C
> > >
> > > Chris Muir
> > > cbm@...
> > > http://www.xfade.com <http://www.xfade.com>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>

Re: ZOe status

2008-09-18 by Carlos

What about an estimate of when the rest of the backordered ZO's will
ship? 

--- In The_Cyndustries_List@yahoogroups.com, Cynthia Webster
<cynthia.webster@...> wrote:
Show quoted textHide quoted text
>
> We've had a few serious ZOe challenges lately,
> for example we have some absolutely stunning
>  circuit boards here and I'm happy to say that
> they fit the front panel and all of the components
>  perfectly, there's just one thing however...
> The 50-pin main connector was laid out in a
> mirror image of what it was supposed to be,
> (which is a fancy way of saying it was totally
> Backwards!)
> 
> Another surprise is that we somehow misjudged
> the depth of the entire assembly and after
> assembling one completely we found it to be a
> half inch too deep to fit the Buchla boats, (metal
> enclosures).
> 
> This all seemed like a serious set-back until we
> thought through the situation and realized that by
> swapping around a few components we might
> actually be ok if we use a 50-pin IDC ribbon
> cable assembly in place of a circuit board, and
> put a flip in the cable to correct the reversed
> connector.  We believe this would also solve the
>  depth problem, so I had to research and order
> new part numbers and we're presently putting
> the pieces together very methodically to be sure
> we get it right. 
> 
> We want to get everything absolutely perfect
> because after all... these are going into ~Buchla~
> cabinets, and it will be an honor to have them
> along side Don's finest.
> 
> 
> Cynthia
> 
> http://www.cyndustries.com/
> 
> 
> 
> Chris Muir wrote:
> >
> > On May 22, 2008, at 11:01 AM, Cynthia Webster wrote:
> >
> >> We're getting there!
> >
> >
> > It's been a while sin e we got an update. What is the current status?
> >
> > -C
> >
> > Chris Muir
> > cbm@...   
> > http://www.xfade.com
> >
> >
> >
> >
> >
> >
> >
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.