Akai S1000 / S1100 samplers

Hello AKAI user

The images are uploaded as promised.

First, I would commend the AKAI for top quality, they chose to use.
S1000KB is built like a tank. Maybe that is why it is so heavy.
My CD ROM is from toshiba model:5301B, and it works with all my other samplers.

Unfortunately, work calls so I can only continue my AKAI story later tonight.

Regards Laszlo

--- In akaiS1000S1100Samplers@yahoogroups.com, PeWe <ha-pewe@...> wrote:
>
> 
> 1.)
> Which CD-ROM do you have ? Brand and type ...
> Is it compatible ? 2-4x speed, simply SCSI, not SCSI 2, ultra or 
> ultra-wide etc. ?
> 
> 2.)
> Akai S-1000 is always on SCSI ID 6,- so set your CD-ROM to any other ID.
> On the back of the CD-ROM (not the enclosure where it might be built in) 
> there is a guide for jumper settings for IDs.
> If it´s built into a external SCSI enlosure, you might find switches to 
> set the ID.
> 
> Same rules for SCSI termination.
> If your CD-Rom is the only one or last device in the SCSI chain,- it has 
> to be terminated.
> This eventually can be done w/ a jumper or a tremination resistor too w/ 
> your CD-Rom drive alone, or a termination plug for your SCSI enclosure 
> might be needed.
> There are also enclosurs w/ switchable termination.
> 
> 3.)
> Connect the CD-ROM drive and power it up
> 
> 4.
> Power up your S-1000,- it will say something like "waiting for harddisk 
> ready" (you can skip at this point if you don´t want to load from a mass 
> storage device).
> 
> 5.)
> Look into your S-1000 manual and follow the steps to access any SCSI 
> harddrive, i.e. set the right SCSI-ID for the SCSI drive which should 
> match the ID of the SCSI-CD-ROM-drive.
> 
> 6.)
> On the S-1000, go to the (harddisk) load menue and look for content (be 
> sure to have a Akai compatible library CD insterted into the CD-ROM drive).
> 
> 7.)
> If you see nothing or if it doesn´t load anything, there´s something 
> wrong like incompatible drive, damaged IB-103 SCSI board, wrong disk, 
> faulty SCSI wirering of the SCSI-drive enclosure,- bad SCSI cable, bad 
> termination,- or you do mistakes.
> 
> 8.)
> please read the manual of your S-1000KB how to access, read & write mass 
> storage devices
> 
> 9.)
> be patient and google for the IB-103 and 104 manuals,- these are 
> somewhere in the web.
> 
> 10.)
> 
> good luck
> 
> :-)
> 
> 
> 
> Am 09.03.2010 11:21, schrieb pillerlaszlo:
> >
> > Hello again
> >
> > Yes it is expanded with SCSI and digital I O module.
> > Dnfortunately can not find the AKAI IB-103 SCSI interface board manual.
> > Is there anyone who is in with it?
> >
> > Regards Laszlo
> >
>