Akai S1000 / S1100 samplers

PROBLEM SOLVED . I formatted HD in internal conector and all SCSI drives are running through SCSI controller!!

--- In akaiS1000S1100Samplers@yahoogroups.com, Jaume Pons <jaumemod@...> wrote:
>
> Well! Well scrotumtightening resolution. After many headaches, the problem
> is to tie a millstone and thrown in the Ebro
> 
> The internal SCSI connector card of Akai IB-103 is turned around, or at
> least is not designed in a logical relation to the standard connection of
> other devices.
> 
> If we look at a standard PIN must always read from right to left and from
> top to bottom, in the cable is always marked with a red streak. Well, to
> read the connection of the sampler card to match the standard should read the
> same but with a view to the left, part welded to the left of elements to the
> right placing the card vertically, as is installed.
> 
> Solution? Take a carving knife and cut the teeth of the cable connector to turn
> it.
> 
> The disk to start the sampler is started (which did not previously) and is
> formatted.
>