Akai S1000 / S1100 samplers

Congrats the Fujitsu MOD works.

Your Dip Switch setting (SW 1 &2 On / 3&4 Off) is correct and it\ufffds also 
correct you have a 2MB board in S0 and the 8MB board in S1.

If you are using one or more 8 Meg boards, the allowable combinations of 
mixed 8 and 2 Meg boards are:

Slot 3 Slot 2 Slot 1 Slot 0

                                          2

                                8        2

                     8         8        2

        2           8         8        2

This should work too,- it did here for me:

       8            8         8        2

This doesn\ufffdt work:

       2            2         8         2

       2            8         2         2

       8            2         2         2

So, 3x 2MB + 1x 8 MB doesn\ufffdt work.

You run 10MB w/ 1x 2 and 1x 8 or need 2 or 3 8MB cards in addition to 
fill all slots.

I myself run 4x 8MB and 2MB + 3x 8 in my two S-1100
I run 4x 2MB in my S-1000

hope that helps

:-)