Akai S1000 / S1100 samplers

Thanks for all the replys.

Yeah, I was worried about the memory because the back is full with 3 8
meg cards, a digital board, and the scsi board; I guess I'll install a
fan with a filter blowing air in a motion of from the floor up to the
ceiling. I'll probably have to make some cuts into the case to get
some ventilation, but I won't touch the front. But I'm glad to hear
that you have the same setup Frank so that's encourging.

Thanks again!

--- In akaiS1000S1100Samplers@yahoogroups.com, "PeWe" <ha-pewe@...> wrote:
>
> Hi !
> 
> Take care of heat ! Depending on which memory-boards you are using,
it can 
> lead to distorted samples !
> I had this w/ an S-1000 mounted in a rack the regular way, but
without some 
> rackspace leftover above the S-1000 ...
> 
> regards, - PeWe
> 
> 
> ----- Original Message ----- 
> From: moose
> To: akaiS1000S1100Samplers@yahoogroups.com
> Sent: Monday, December 11, 2006 8:58 PM
> Subject: Re: [akaiS1000S1100Samplers] Racking the S1000
> 
> >function-wise its fine, though heat rises so the front might get
hotter 
> >than intended. at least mounting it horizontally lets the heat rise
in to 
> >the case. >dust is evil too!!
>