Hi again, Regarding my previous post about memory cards; further reading has enlightened me about the "MWord" value (its being half the installed amount of RAM in MB). So everything's hunky dory in that respect. I'm still foggy about the capacitor issue though. Thanks, -Josh --- In akaiS1000S1100Samplers@yahoogroups.com, "Josh" <basicj@...> wrote: > > Hi all, > > I'm a new member, just bought an S1000. It came with no manuals or > accessories so a huge thanks to formals777 for providing the pdf > manual in the files section. Akai's archive site seems to have > evaporated... > > When my unit arrived, the memory cards had come loose (the bracket > that holds them in at the top is missing). I've replaced them in the > order they appeared to go in, although one had completely fallen out > of the bay so I may have the order wrong. The first card has a > capacitor which is supposed to connect to the chassis, does anyone > know what its purpose is (presumably to discharch excess static)? The > machine runs fine without it connected but if that's a bad idea I'd > like to know. > > None of the four cards mention specific memory size. I've narrowed > one down; it came in 2 and 8mb sizes according to a website listing > it. Another is listed on a german site as being 8mb, (with a question > mark next to it), but as far as I know my S1000 wasn't modified to use > cards larger than 2mb. The other two simply say "S1000-Mem" and there > are no further identifying numbers or marks that seem relevant. > Therefore I'm assuming they're 2mb each. The software reports only > 4mb total. Bit of a mystery there. Any advice? Booting the machine > with each card in slot #0 to determine size worth a try? > > Cheers, > -Josh >
Message
Re: Memory card musings
2007-01-17 by Josh
Attachments
- No local attachments were found for this message.