Akai S1000 / S1100 samplers

Ooh Man!
I'm so Stupid. You're Right, i have must Think at it.
The previsous Owner had say, it was 10Meg, and then it Displays only 5 Meg. I Think, he have forgot to attach his Eyeglasses and tell me what about a Horse. ;-)
So it's good to know, that the Memory are right detected.
But the Error with the Sounds?
I found this Site http://www.transanalog.com/ and ask for an Service Manual. Now wait for Answer.
A other Thing, i found the Eproms Labeled with S1100 V2.2 in LSB Socket, and S1000 V2.2 in the MSB. Is this a Problem?
But the S1000 Start's right and seem to Work correct, except the Sound Problem.
 


--- In akaiS1000S1100Samplers@yahoogroups.com, PeWe <ha-pewe@...> wrote:
>
> O.k.,- obviously it´s all fine ´cause the size of memory in S-1000 / 
> S-1100 is reported in mega-words, not mega-bytes ! :-)
> 
> 1 byte is 8bits and 1 word is 16bits and the S-series samplers are 16bit 
> samplers,- means: 1 mega word is two mega-bytes.
> 
> Watch your display carefully,- it says mega words !
> 
> So,- 2 mega words are 4 MB and 4 mega words are 8MB
> 
> If your display reads 5 mega words, there are 10MB recognized in real !
> 
> Tech info about installation of memory boards in the S-1000 / S-1100 is 
> here,- incl. re-soldering of the mainboard for usage of 2meg cards only 
> or combos of 2meg cards and 8meg cards as well as usage of 8meg cards 
> only ...
> 
> http://www.firstpr.com.au/rwi/smem/8Meg.html
> 
> Software upgrades and manuals ( not service manuals unfortunally) for 
> your S-series Sampler here ...
> 
> http://www.firstpr.com.au/rwi/smem/
> 
> hope that helps
> 
> :-)
> 
> 
> marber_mba schrieb:
> >
> >
> > Thank's for the fast Answer,
> >
> > i put all Card's, incl. an MuTec SCSI, out and tested all alone.
> > With the Original 2Meg Card in the very first Slot it Displays 1Mb 
> > free Memory, and with the 8Meg in the first only 4. And the 2Meg in 
> > the first and the 8Meg in the second Slot say's 5MWord free. :-(
> > I don't know if the Jumpers re-soldered, because i don't have put the 
> > Mainboard out. But the previsous Owner says, it has Work with 10Meg 
> > before. Once a Day after Turn on the Unit, it has Display the Half of 
> > the Memory.
> >
> >
> >
>