Maybe its a HD which consumes a lot of power. In my case, the HD keeps
spinning, but there seems to be a problem with my SCSI interface, at
least the internal side. According to the technician at Mutec, a scsi
card is able to support an internal HD.
Mostly, when a HD stops spinning, there is a problem with the scsi cable.
I always thought that the internal scsi bus is just parallel to the
external one, but this is not true. As far as I can see, only data
signals are the same. The control signals come from different pins on
the controller chip.
Maybe someone else has more experience with that.
Rgds,
Frank
--- In akaiS1000S1100Samplers@yahoogroups.com, "manaay"
<mlampret@e...> wrote:
Show quoted textHide quoted text
> I put HD into my PC and I can access it from S1100. It looks like
> specil HD is needed for internal mounting..??
>
> regards.. Miha
>
>
> --- In akaiS1000S1100Samplers@yahoogroups.com, "manaay"
> <mlampret@e...> wrote:
> > Hi all,
> >
> > I am trying to install internal HD into my s1100. I bought Conner
> > CFA540s scsi disk and data cable. Disk starts if I plug in only power
> > cable but if I plug data cable too then it doesn't power up.. and I am
> > sure that power cable was made correctly.. I also tried to set
> > different ids for disk but no success.. disk is terminated.
> > It looks like AKAI doesn't send power on p125 if disk is plugged to
> > scsi card (I checked with instrument). Is there anything else that I
> > should set up. I would understand that disk is not recognized or
> > something but it is realy strange that it doesn't get electricity..
> > Anyone had similar ploblems? All sugestions are welcome..
> >
> > thanks,
> > Miha
