Analogue-sequencer

Folks,

v3.963 (in files now) adds a few small things...

The note range covered by the knobs in pattern edit is now 
configurable for any base note and four different ranges.
You'll find 'note rng' in the pattern edit softkeys between 'aux 
conf' and 'Apply FTS'. Press the key alone to set the bottom note 
for note entry, and FUNC+<note rng> to select the range.
If you install this build and find you can't enter notes - it's 
probably because you have not set this new option.

Next addition is a display of the steps remaining in the current 
gbar. Paul Nagle asked for this to help remind him when he's 
supposed to be moving on to the next bit. Expect shorter gigs from 
Paul in future.
Hold the upper knob mode key in play mode to show this.
The second mode LED option in play mode has changed to a gbar count 
too - press step mode to switch from VU mode. Mr Nagle wasn't keen 
on the binary countdown, but I quite like it...

Last addition is an 'X' in the sysex recv display to show there was 
at least one error in the received dump. This makes it possible to 
verify a P3 dump by sending it back to the P3 - if you see an 'X' 
during receive, the dump may have errors.
I put this in so I could check whether a sysex dump from one P3 to 
another would work OK, which it seems to do nicely.

Cheers,
Colin f