Analogue-sequencer

On Thu, 19 Aug 2004, Colin f wrote:

> Still no go on the function switch board then ?
> Have you got any kind of continuity tester ?
> It'll possibly be easier to work out why the switches aren't working
> than the LEDs.

i haven't had a chance to mess with it... the wife has been home during
the evening this week. :) i don't have a continuity tester, but i'll see
if i can scare one up... i did order new leds and transistors from mouser,
just in case one of those is fried.

when i'm looking down the function swithc board with S1 close to me and S2
away, i should see more metal inside the LEDs on the right hand side,
correct? the board isn't near me at the moment, but this would mean (i
think) that the cathode is in fact in the square pad which is where it
should be, correct? if that's the case, then the problem has to be
internal to the cable or, more likely, the plug itself. i have zero
problems with the step keys or the keypad...

and speaking of switches, i was wondering if it were possible for you to
send me a couple of those multimec switches & caps. the caps for the tact
switches i have are, of course, too big, and the switches are too low to
the board anyway. i can paypal you $$$ (wel, LLL :) as soon as you let me
know if you can do this and what it would cost. (oh yes... it seems
impossible to get these switches & caps in the us... all the caps are too
wide and short)

thanks!
fred.

bleep.
out.

---
http://leichenfeld.iuma.com
http://thirdwavecollective.com