Analogue-sequencer

> Good idea.  I'll contact Duncan.  How's the current draw?  comparable?

No other change needed with the LEDs I used.
 
> I'm very comfortable doing some soldering so I'd probably do the LED 
> mod myself as needed.

The boards are all thru hole plated, so it's easiest to just clip off the
old LEDs then de-solder each leg by itself.
Mounting the new LEDs all to the same height is the tricky bit, though I've
started using 6.4mm spacers now.
I'm sure a US supplier should have some of those.
Only solder the middle leg, then test fit the board to get the LEDs lined up
in their holes before soldering the other legs - this stops them going in at
the wrong angle.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com