Analogue-sequencer

--- In analogue-sequencer@yahoogroups.com, henry <audio@m...> wrote:
>
> Hi Colin,
> with  3.1.006beta32 installed I recognized sometimes the P3 turns to  
> a stuck/freeze/crash mode when its running in midi clock slave mode  
> to logic 7.1.1 / OSX 10.4.3 here, I have to switch it off/on again no  
> make it  work again. any idea what that could be ?
> midi chain:
> masterkeyboard (only, note, AT, CC used, no active sensing sended) >  
> midi merger >P3input/3midi out A > MT4 in
> MT4 midi interface out > midi merger > P3 input / P3midi out A > MT4 in

Henry-

I sometimes see the same thing on my setup (Digital Performer, MOTU
MTP AV) when the MIDI is looping back. It looks like you've got the P3
looping back into the MT4 and the MT4 is going to the in of the P3.
Check Logic out to see if a MIDI thru is happening there or if a MIDI
channel is both recording and playing at the same time.

To double check, you can pull the output from the P3 to the MT4 and
see if the behavior persists. If not, then you've got a MIDI loopback
issue somewhere.

-Jim
www.touchxtone.com