Analogue-sequencer

Hello, finally I can run the P3 synchronized with Cubase SX. First I want to thank you for the hints. My procedure is as follows, if someone has now or in the future the same problem this is a good way to do it. 

- I use Midi OX and Midiyoke (Thanks Tony). These are realy good apps and you can download them for free.
- First thing, I configure Midi OX. I setup Midi Yoke 1 as input port and the output to the P3 port in the midi interface. I filtered all the events in the Midi Ox filter, excepting start stop and continue messages (Note on and Note off are optional).
- I opened the Midi OX Midi sync window and  "send clock". The BPM in this window has to match the BPM on your cubase project. Don't hit play in this window.
- Then in Cubase I chose in the transport confing to send midi clock to the Midi Yoke channel 1.

That's all, the P3 now responds to the start, stop and continue messages from Cubase and keeps the timing.

Anyway I would like that P3 will sync Cubase like any other machine, I don't know still if there can be any latency issue although all my tests seem to work fine.

Thanks for your help.

Regards.

Miguel Mendoza.



[Non-text portions of this message have been removed]