Analogue-sequencer

Folks,

Seems I forgot a little something...
If you have a production P3, and your bootloader (accessed with 
FUNC+PAGE at power on) does *not* show:

v3.2  CHK = xxxx
boot       flash

then you need a bootloader update.
This is due to a datasheet error for the newer CPUs that suggests a 
control bit defaults to one state, when it actually defaults to the 
other, and my assumption that datasheets are correct.
The problem only appeared because the main image is now larger than 
62k.

You'll find the update, and instructions for use, in the files 
section.
The filenames are p3-bootloader-v3.2-AT.
This is absolutely the last bootloader update you'll need.
Sorry for any hassle...

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com