Analogue-sequencer

> Hello, I have found some issues updating to the new SO. First 
> I tried to do it with the P3 Tools 1.06 with no results, no 
> data is received wit the P3. Even I tried later to receive 
> patches to the utility and nothing. This application was 
> working last time I used it, I checked midi channels, configs 
> etc... Any idea?

That does sound like a MIDI problem at the PC end.
You could try deleting and re-defining the P3 connection in "Define P3s",
and make sure the ports are still OK.
IIRC, adding or reinstalling MIDI devices can cause them to be numbered
differently.
 
> My second try was with Midi OX and the P3 received data, but 
> with each block I got a "Bad Data" message on the display. 
> After all, rebooting the P3 shew a V 3.1006. Now it seems to 
> be working and with the software updated but the "Bad Data" 
> messages make me doubt. So, do you think I updated correctly 
> the P3? Anybody experienced these issues?

It could be a MIDI loop causing the BAD DATA messages.
If the newly installed firmware boots up without the bootloader giving a
'CHK error', then it has installed OK.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com