Analogue-sequencer

Well, it was booting untill right now. All leds on upper and step mode are on but the unit doesn't boot.

Any idea?

Thanks.

  ----- Original Message ----- 
  From: Colin f 
  To: analogue-sequencer@yahoogroups.com 
  Sent: Wednesday, April 12, 2006 11:24 AM
  Subject: RE: [analogue-sequencer] Updating to 3.1006



  > Hello, I have found some issues updating to the new SO. First 
  > I tried to do it with the P3 Tools 1.06 with no results, no 
  > data is received wit the P3. Even I tried later to receive 
  > patches to the utility and nothing. This application was 
  > working last time I used it, I checked midi channels, configs 
  > etc... Any idea?

  That does sound like a MIDI problem at the PC end.
  You could try deleting and re-defining the P3 connection in "Define P3s",
  and make sure the ports are still OK.
  IIRC, adding or reinstalling MIDI devices can cause them to be numbered
  differently.

  > My second try was with Midi OX and the P3 received data, but 
  > with each block I got a "Bad Data" message on the display. 
  > After all, rebooting the P3 shew a V 3.1006. Now it seems to 
  > be working and with the software updated but the "Bad Data" 
  > messages make me doubt. So, do you think I updated correctly 
  > the P3? Anybody experienced these issues?

  It could be a MIDI loop causing the BAD DATA messages.
  If the newly installed firmware boots up without the bootloader giving a
  'CHK error', then it has installed OK.

  Best regards,
  Colin Fraser
  Sequentix Music Systems Ltd
  http://www.sequentix.com




------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS 

    a..  Visit your group "analogue-sequencer" on the web.
      
    b..  To unsubscribe from this group, send an email to:
     analogue-sequencer-unsubscribe@yahoogroups.com
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]