Analogue-sequencer

Try initializing the bank (presume it's bank 1 you are working with) though
I thought bank 1 was blank to start with anyway.

Good luck!...Graham

> >-----Original Message-----
> >From: analogue-sequencer@yahoogroups.com [mailto:analogue-
> >sequencer@yahoogroups.com] On Behalf Of synchro1
> >Sent: 08 August 2006 05:24
> >To: analogue-sequencer@yahoogroups.com
> >Subject: [analogue-sequencer] am I missing something obvious?
> >
> >Just received a brand new P3 from Analogue Haven this afternoon.  Turn
> >it on and it defaults to Part 5, pattern 1.  witch to [attern 1, part
> >1 and start through the manual.  It plays part 1 just fine.  But enter
> >a track/pattern for part 2 and it won't let me go there at all - it
> >jumps up to part 5.  This occurs if the P3 is running or not.  It
> >occurs on all parts except 1.  Press any other part button and it
> >reverts to part 5.  Try chaining parts 1, 2 and 3.  It plays part 1
> >and shows the amber LED for parts 2 and 3.  It gets to part 2, plays
> >one pass and then snaps up to part 5 even though part 5 was not
> >selected in the chain at all.
> >
> >Physically, the sequencer looks immaculate and the box arrived well-
> >packed and with no obvious damage.  It acts as-if the part 5 button is
> >always pushed down except when part 1 (and only part 1) is selected.
> >
> >Does this make any sense?  I gave it about an hour of trying and then
> >wiped the memory by turning on while holding down key 7 & F1.  No
> >difference.  Any help appreciated.
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >