Analogue-sequencer

>  I'm starting to layout my panel and I'd like to know the space 
between the
> pots/buttons/LEDs so I can get the holes in the right places :-)
> I'm guessing they will all be the same distance apart Horizontally, 
but
> what about vertically (for the LED/Switchs as they're on the same 
PCB)

Can't remember off the top of my head - either check out the .fpd 
file on my webpage, or I'll check myself when I get home.
The spacing may be slightly different for tact switches, but the 
centres will be the same.
Also, the mounting points at the mid-point of the switch/LED board 
will be rationalised, since I'm no longer using 2 separate boards - 
my home PCB etching equipment has a 8" size limit.

The horizontal spacing of the switches and pots is 19.05 mm, or 0.75".
The gap between the pot boards and the switch board can be varied to 
taste. Putting these boards as close as they can go is not very 
ergonomic. I think I've got them about 20mm apart vertically.

Colin f