Analogue-sequencer

hi everybody,i am building the sequentix p3 number 61(perhaps the
last)...after different researchs my last steps are: 
1-Buttons and tactile switches 
2-case desktop  style if possible 
3-countersunk screw and spacers
...i am look for the famous cherry switches!!!....for the moment ..i
have found :Buttons for tactile switches of rapid..but it's not
possible to add a legend on it (yes with a pencil...; ) 
nothing at maplin (?)..i try to  built a nice p3...if you have some
ideas and links..let me know. i began to change the schaeffer file
cause my lcd (blue and white)and i am able to make another changes . 
best regards phil

-- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...>
wrote:
>
> 
> > -hi Colin,after loading the shaeffer software..it seems that my 061
> > version 1.4 pcb pad key is good...i have a little doubt(1or2
> > millimetre)...when you change these key holes,do you move a lot?or
> > just a few millimetres? best regards
> 
> The holes were moved maybe 2mm each away from the edge of the cutout
for the
> keys, because the press-fit mounting posts used in the production cases
> needed more metal around them.
> There is only a difference in the distance from the top to the
bottom holes,
> the horizontal dimensions are the same.
> If you print out the Schaeffer panel in 1:1 scale, wireframe mode, with
> reference points on, you will be able to sit the PCB on top of the
printout,
> and see whether they line up with the panel holes.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>