Analogue-sequencer

hi colin...my search gave me an important information...on the 1.6
version bill...(at this time i 've taken my information on the 1.4
version bill cause my pcb 061) i found 4.7 k linear pot ;can i use it
in my version?could i make the update 3.8 with?can i take 4.7 for step
and 10K for data and tempo?do you sell cherry custom p3 switches? do
you have a i/O pcb for multi midi out?have you an used front panel and
case...perhaps you want to sell..;-)(before i order to
schaeffer).thanks for your great work and your patience..i am not very
very experimented..and i must take care  for each detail...best
regards..boop's



- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
<boops.secretvibes@...> wrote:
>
> hi everybody,i am building the sequentix p3 number 61(perhaps the
> last)...after different researchs my last steps are: 
> 1-Buttons and tactile switches 
> 2-case desktop  style if possible 
> 3-countersunk screw and spacers
> ...i am look for the famous cherry switches!!!....for the moment ..i
> have found :Buttons for tactile switches of rapid..but it's not
> possible to add a legend on it (yes with a pencil...; ) 
> nothing at maplin (?)..i try to  built a nice p3...if you have some
> ideas and links..let me know. i began to change the schaeffer file
> cause my lcd (blue and white)and i am able to make another changes . 
> best regards phil
> 
> -- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@>
> wrote:
> >
> > 
> > > -hi Colin,after loading the shaeffer software..it seems that my 061
> > > version 1.4 pcb pad key is good...i have a little doubt(1or2
> > > millimetre)...when you change these key holes,do you move a lot?or
> > > just a few millimetres? best regards
> > 
> > The holes were moved maybe 2mm each away from the edge of the cutout
> for the
> > keys, because the press-fit mounting posts used in the production
cases
> > needed more metal around them.
> > There is only a difference in the distance from the top to the
> bottom holes,
> > the horizontal dimensions are the same.
> > If you print out the Schaeffer panel in 1:1 scale, wireframe mode,
with
> > reference points on, you will be able to sit the PCB on top of the
> printout,
> > and see whether they line up with the panel holes.
> > 
> > Best regards,
> > Colin Fraser
> > Sequentix Music Systems Ltd
> > http://www.sequentix.com
> >
>