Analogue-sequencer

hi,Colin ,i put the chip version 1.6 on the main board 1.4,unluckly
the soft is freezing on this this screen     1/6 
                                             BANK FTS TUNE
 i 've tried F1+STEP 7 ,freeze again.
 i've tried to get off the battery memories always 1/6 
                                                   BANK FTS TUNE

any steps work...what can i do?:-( i 've maded this, cause i've got
always this tempo (moove alone) problem on the version
1.4...nightmare..Best regards





--- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
<boops.secretvibes@...> wrote:
>
> hi,thanks Colin for your informations..every seems alright for the
> moment...for the two P3(just  change a lcd connection ,and bootload)i
> must try midi and learn the manual..also 2 memX for me please(not just
> one as i 've written)Best regards..
> 
> 
> 
> - In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@> wrote:
> >
> >  
> > > -hello,i 've finished today the 2ND main board P3 kit 1.6 with
> > > 3.006B,can i try it with my 1.4 others boards ,awaiting that i
> > > bootload the 1.4 chip ?i 've got always this tempo problem with
> > > this...work - no work (when i put my finger on the 3 pins of the
pot,
> > > working during a few seconds,ground problem?
> > 
> > There are two different clock speeds that the CPU may run at.
> > Pre-production P3s used an 18MHz crystal, production units used 24MHz.
> > As long as the crystal speed matches the CPU, you can use the later
> chips in
> > the early boards, and vice versa.
> > Each CPU has the crystal speed it is meant to run at stored in
> flash. The OS
> > adjusts to run at either speed by checking that setting.
> > 
> > Best regards,
> > Colin Fraser
> > Sequentix Music Systems Ltd
> > http://www.sequentix.com
> >
>