Analogue-sequencer

hi,Colin, at the end of the loading syx file of the firmware image ,is
there a message by example "SUCCESS"?before i must reboot ?i dont
touch the main board just put the chip in the 1.4 board (it worked
perfectly)and when i unstall it :screen like 
this 1/3 
     BANK FTS TUNE (freeze)
(and i remember i 've done F1+STEP7 action)                   
then 1/6 
     BANK FTS TUNE (freeze but number bank change)
     
this the last screen after boot .To load ,all the boards must be
plugged? cause i don't have the second front panel yet.
   

about the version 1.4 i try to find this tempo data problem(moove on
the PLED) 
the IDC 16 of pot boards are further than 1.6 also my connections are
longer..when you speak about digital noise ..can it disturb the
function data tempo? 

i work during 7 days on this two machines...some time i play 10 mn
instant gratification..sounds good..but one has this cpu problem and
the other data tempo no good for the moment,thank you very very
much..it's seem you are the only personn who know this P3 (compare at
midibox forum) really thank to try to help me. best regards Boops



--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...>
wrote:
>
> If the P3 boots into firmware update mode, and successfully loads the
> firmware image, then reboots without showing a checksum error, but
doesn't
> get any further, it seems more like a hardware problem.
> What exactly appears on the LCD display when it fails to boot ?
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
> 
> 
> 
> > -----Original Message-----
> > From: analogue-sequencer@yahoogroups.com 
> > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> > boops.secretvibes
> > Sent: 08 July 2008 10:41
> > To: analogue-sequencer@yahoogroups.com
> > Subject: [analogue-sequencer] Re: some help to finish my 
> > first P3 version 1.4
> > 
> > hi,nobody  have a little idea to follow..to give ,this CPU a second
> > chance to work...Boop's
> > 
> > 
> > --- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
> > <boops.secretvibes@> wrote:
> > >
> > > i 've made the  firmware UPDATE 3.006C after this V3.2CHK2B7C
> > > >                                                 BOOT    FLASH
> > > 
> > > THEN I FLASH AND TRANSMIT ALL THE FILE(MORE DATA ON THE SCREEN). 
> > > SCREEN ASK SIZE F180 THEN I BOOT BUT NOTHING HAPPENS I TRY A SECOND
> > > TIME;NOTHING;PERHAPS THE VERSION 3.006B WHICH WAS INSTALLED?THANKS
> > > 
> > > 
> > > 
> > > > If it gets as far as that screen, the bootloader is working.
> > > > It would be odd for the OS to be corrupt but not to show 
> > a checksum
> > > error at
> > > > boot.
> > > > Try reloading the OS using firmware update mode - FUNC+PAGE at
> > power on.
> > > > 
> > > > Best regards,
> > > > Colin Fraser
> > > > Sequentix Music Systems Ltd
> > > > http://www.sequentix.com
> > > > 
> > > >  
> > > > 
> > > > > -----Original Message-----
> > > > > From: analogue-sequencer@yahoogroups.com 
> > > > > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> > > > > boops.secretvibes
> > > > > Sent: 07 July 2008 23:02
> > > > > To: analogue-sequencer@yahoogroups.com
> > > > > Subject: [analogue-sequencer] Re: some help to finish my 
> > > > > first P3 version 1.4
> > > > > 
> > > > > hi,Colin ,i put the chip version 1.6 on the main board 
> > 1.4,unluckly
> > > > > the soft is freezing on this this screen     1/6 
> > > > >                                              BANK FTS TUNE
> > > > >  i 've tried F1+STEP 7 ,freeze again.
> > > > >  i've tried to get off the battery memories always 1/6 
> > > > >                                                    BANK FTS TUNE
> > > > > 
> > > > > any steps work...what can i do?:-( i 've maded this, 
> > cause i've got
> > > > > always this tempo (moove alone) problem on the version
> > > > > 1.4...nightmare..Best regards
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > --- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
> > > > > <boops.secretvibes@> wrote:
> > > > > >
> > > > > > hi,thanks Colin for your informations..every seems 
> > alright for the
> > > > > > moment...for the two P3(just  change a lcd connection ,and 
> > > > > bootload)i
> > > > > > must try midi and learn the manual..also 2 memX for me 
> > > > > please(not just
> > > > > > one as i 've written)Best regards..
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > - In analogue-sequencer@yahoogroups.com, "Colin Fraser" 
> > > > > <colin@> wrote:
> > > > > > >
> > > > > > >  
> > > > > > > > -hello,i 've finished today the 2ND main board P3 
> > kit 1.6 with
> > > > > > > > 3.006B,can i try it with my 1.4 others boards 
> > ,awaiting that i
> > > > > > > > bootload the 1.4 chip ?i 've got always this tempo problem
> > with
> > > > > > > > this...work - no work (when i put my finger on the 3 pins
> > of the
> > > > > pot,
> > > > > > > > working during a few seconds,ground problem?
> > > > > > > 
> > > > > > > There are two different clock speeds that the CPU 
> > may run at.
> > > > > > > Pre-production P3s used an 18MHz crystal, production 
> > > > > units used 24MHz.
> > > > > > > As long as the crystal speed matches the CPU, you can use 
> > > > > the later
> > > > > > chips in
> > > > > > > the early boards, and vice versa.
> > > > > > > Each CPU has the crystal speed it is meant to run 
> > at stored in
> > > > > > flash. The OS
> > > > > > > adjusts to run at either speed by checking that setting.
> > > > > > > 
> > > > > > > Best regards,
> > > > > > > Colin Fraser
> > > > > > > Sequentix Music Systems Ltd
> > > > > > > http://www.sequentix.com
> > > > > > >
> > > > > >
> > > > > 
> > > > > 
> > > > > 
> > > > > ------------------------------------
> > > > > 
> > > > > Yahoo! Groups Links
> > > > > 
> > > > > 
> > > > >
> > > >
> > >
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> >
>