Analogue-sequencer

Hi Colin,very good news,the 2 x P3 work fine tonight,there was a micro
short cut(hardware as you 've said)...very difficult to find....thanks
for your informations...i've became a professional of harware and
software P3 ;-)...zouuuuu !!!Print the last part of the manual...Best
regards .Boop's


-- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
<boops.secretvibes@...> wrote:
>
> hi,last good news,the P3 1.4 is uptade ,and finish ,every function
> work fine..thanks 
> 
> 
> - In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
> <boops.secretvibes@> wrote:
> >
> > hi,Colin data ,tempo pots work fine now...is it possible velocity
> > don't work in version 3.95?i beleive ,it's time,to install midiox now
> > for uptaded the version 3.006C!!.. thanks
> > 
> > 
> > --- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
> > <boops.secretvibes@> wrote:
> > >
> > > hi,Colin, at the end of the loading syx file of the firmware
image ,is
> > > there a message by example "SUCCESS"?before i must reboot ?i dont
> > > touch the main board just put the chip in the 1.4 board (it worked
> > > perfectly)and when i unstall it :screen like 
> > > this 1/3 
> > >      BANK FTS TUNE (freeze)
> > > (and i remember i 've done F1+STEP7 action)                   
> > > then 1/6 
> > >      BANK FTS TUNE (freeze but number bank change)
> > >      
> > > this the last screen after boot .To load ,all the boards must be
> > > plugged? cause i don't have the second front panel yet.
> > >    
> > > 
> > > about the version 1.4 i try to find this tempo data problem(moove on
> > > the PLED) 
> > > the IDC 16 of pot boards are further than 1.6 also my
connections are
> > > longer..when you speak about digital noise ..can it disturb the
> > > function data tempo? 
> > > 
> > > i work during 7 days on this two machines...some time i play 10 mn
> > > instant gratification..sounds good..but one has this cpu problem and
> > > the other data tempo no good for the moment,thank you very very
> > > much..it's seem you are the only personn who know this P3
(compare at
> > > midibox forum) really thank to try to help me. best regards Boops
> > > 
> > > 
> > > 
> > > --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@>
> > > wrote:
> > > >
> > > > If the P3 boots into firmware update mode, and successfully
> loads the
> > > > firmware image, then reboots without showing a checksum error, but
> > > doesn't
> > > > get any further, it seems more like a hardware problem.
> > > > What exactly appears on the LCD display when it fails to boot ?
> > > > 
> > > > Best regards,
> > > > Colin Fraser
> > > > Sequentix Music Systems Ltd
> > > > http://www.sequentix.com
> > > > 
> > > > 
> > > > 
> > > > > -----Original Message-----
> > > > > From: analogue-sequencer@yahoogroups.com 
> > > > > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> > > > > boops.secretvibes
> > > > > Sent: 08 July 2008 10:41
> > > > > To: analogue-sequencer@yahoogroups.com
> > > > > Subject: [analogue-sequencer] Re: some help to finish my 
> > > > > first P3 version 1.4
> > > > > 
> > > > > hi,nobody  have a little idea to follow..to give ,this CPU a
> second
> > > > > chance to work...Boop's
> > > > > 
> > > > > 
> > > > > --- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
> > > > > <boops.secretvibes@> wrote:
> > > > > >
> > > > > > i 've made the  firmware UPDATE 3.006C after this V3.2CHK2B7C
> > > > > > >                                                 BOOT   
FLASH
> > > > > > 
> > > > > > THEN I FLASH AND TRANSMIT ALL THE FILE(MORE DATA ON THE
> SCREEN). 
> > > > > > SCREEN ASK SIZE F180 THEN I BOOT BUT NOTHING HAPPENS I TRY A
> > SECOND
> > > > > > TIME;NOTHING;PERHAPS THE VERSION 3.006B WHICH WAS
> INSTALLED?THANKS
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > > If it gets as far as that screen, the bootloader is working.
> > > > > > > It would be odd for the OS to be corrupt but not to show 
> > > > > a checksum
> > > > > > error at
> > > > > > > boot.
> > > > > > > Try reloading the OS using firmware update mode -
FUNC+PAGE at
> > > > > power on.
> > > > > > > 
> > > > > > > Best regards,
> > > > > > > Colin Fraser
> > > > > > > Sequentix Music Systems Ltd
> > > > > > > http://www.sequentix.com
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > > -----Original Message-----
> > > > > > > > From: analogue-sequencer@yahoogroups.com 
> > > > > > > > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> > > > > > > > boops.secretvibes
> > > > > > > > Sent: 07 July 2008 23:02
> > > > > > > > To: analogue-sequencer@yahoogroups.com
> > > > > > > > Subject: [analogue-sequencer] Re: some help to finish my 
> > > > > > > > first P3 version 1.4
> > > > > > > > 
> > > > > > > > hi,Colin ,i put the chip version 1.6 on the main board 
> > > > > 1.4,unluckly
> > > > > > > > the soft is freezing on this this screen     1/6 
> > > > > > > >                                              BANK FTS TUNE
> > > > > > > >  i 've tried F1+STEP 7 ,freeze again.
> > > > > > > >  i've tried to get off the battery memories always 1/6 
> > > > > > > >                                                    BANK
> > FTS TUNE
> > > > > > > > 
> > > > > > > > any steps work...what can i do?:-( i 've maded this, 
> > > > > cause i've got
> > > > > > > > always this tempo (moove alone) problem on the version
> > > > > > > > 1.4...nightmare..Best regards
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > --- In analogue-sequencer@yahoogroups.com,
> "boops.secretvibes"
> > > > > > > > <boops.secretvibes@> wrote:
> > > > > > > > >
> > > > > > > > > hi,thanks Colin for your informations..every seems 
> > > > > alright for the
> > > > > > > > > moment...for the two P3(just  change a lcd connection
> ,and 
> > > > > > > > bootload)i
> > > > > > > > > must try midi and learn the manual..also 2 memX for me 
> > > > > > > > please(not just
> > > > > > > > > one as i 've written)Best regards..
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > - In analogue-sequencer@yahoogroups.com, "Colin Fraser" 
> > > > > > > > <colin@> wrote:
> > > > > > > > > >
> > > > > > > > > >  
> > > > > > > > > > > -hello,i 've finished today the 2ND main board P3 
> > > > > kit 1.6 with
> > > > > > > > > > > 3.006B,can i try it with my 1.4 others boards 
> > > > > ,awaiting that i
> > > > > > > > > > > bootload the 1.4 chip ?i 've got always this tempo
> > problem
> > > > > with
> > > > > > > > > > > this...work - no work (when i put my finger on the 3
> > pins
> > > > > of the
> > > > > > > > pot,
> > > > > > > > > > > working during a few seconds,ground problem?
> > > > > > > > > > 
> > > > > > > > > > There are two different clock speeds that the CPU 
> > > > > may run at.
> > > > > > > > > > Pre-production P3s used an 18MHz crystal, production 
> > > > > > > > units used 24MHz.
> > > > > > > > > > As long as the crystal speed matches the CPU, you
> can use 
> > > > > > > > the later
> > > > > > > > > chips in
> > > > > > > > > > the early boards, and vice versa.
> > > > > > > > > > Each CPU has the crystal speed it is meant to run 
> > > > > at stored in
> > > > > > > > > flash. The OS
> > > > > > > > > > adjusts to run at either speed by checking that
setting.
> > > > > > > > > > 
> > > > > > > > > > Best regards,
> > > > > > > > > > Colin Fraser
> > > > > > > > > > Sequentix Music Systems Ltd
> > > > > > > > > > http://www.sequentix.com
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > ------------------------------------
> > > > > > > > 
> > > > > > > > Yahoo! Groups Links
> > > > > > > > 
> > > > > > > > 
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > 
> > > > > 
> > > > > 
> > > > > ------------------------------------
> > > > > 
> > > > > Yahoo! Groups Links
> > > > > 
> > > > > 
> > > > >
> > > >
> > >
> >
>