Analogue-sequencer

Thanks Dave, after some more experimenting I found if I put the Nemo and P3
in series rather than parallel it fixes the clock issue.

Not sure if the clock can be switched off on the Nemo. 

> >-----Original Message-----
> >From: analogue-sequencer@yahoogroups.com 
> >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of DB
> >Sent: 29 March 2009 20:27
> >To: analogue-sequencer@yahoogroups.com
> >Subject: Re: [analogue-sequencer] Midi merging two 
> >sequencers / clock sync'd delay
> >
> >Does the Nemo have a way to turn off the Midi Clock?  If 
> >not, then you might want to slave the P3 to the Nemo and 
> >then go the Midi Clock option on the P3 and turn it off.
> >
> >I have an MPC 4000/P3 setup and either only 1 can be 
> >emitting the clock, or I have to mute Clock events on my 
> >MidiTimepiece from one the sequencers if not...
> >
> >
> >But the P3 does allow you to turn off the clock output. Try 
> >that with it 
> >slaving to the
> >Nemo....
> >
> >
> >Dave
> >
> >
> >
> >Ditton33 wrote:
> >>
> >> Hi All
> >>
> >> I've been having a fun time with midi cables. ;)
> >>
> >> I'm trying to midi-merge the outputs from a Sequentix P3 
> >and a GenoQs Nemo
> >> so I can control any synth from either sequencer without 
> >swapping cables.
> >>
> >> The Nemo is slaved to the P3.
> >>
> >> The issue I seem to hit is that any synth I have set up 
> >with clock-sync'd
> >> delay goes a bit haywire (ie the delay shuffles rather 
> >than bounces). I
> >> suspect the merged clocks are the issue.
> >>
> >> I'm using a Roland/Edirol UM550 to do the merge.
> >>
> >> Have people successfully found a way to do this, or do you 
> >tend to hang
> >> different synth modules off different sequencers and 
> >manually repatch when
> >> you fancy a change?
> >>
> >> Or perhaps it's the UM550 not handling clock merge very well?
> >>
> >> Any advice appreciated. :)
> >>
> >>
> >>
> >>
> >> .
> >>
> >> 
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >