Analogue-sequencer

QUOTE/But you don't really need that board - the ribbon cable can be soldered directly to the LCD module/QUOTE
I've done already this on my first p3 ,as it 's the first version kit...not very strong...is the pcb shematic available to make one,in all case thanks very much for your answer ;-)

 In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...> wrote:
>
>  
> > THANKS AGAIN COLIN is it possible to buy from you a A1A2 
> > BOARD as i 've bought a second hand kit ,this board is 
> > soldered on a no working lcd and i already  have got a new 
> > lcd
> 
> That board is the PLED adaptor board. The original board won't drive the
> backlight on an LCD module without adding some extra fly-wires for pins 15
> and 16.
> But you don't really need that board - the ribbon cable can be soldered
> directly to the LCD module, paying attention to the fact that pins 15 and 16
> are usually found next to pin 1 on an LCD module (i.e. 15, 16, 1, 2, ... 14)
> It's just quicker and more elegant to use the adaptor board.
> I don't normally have any spare adaptor boards, as I buy them in equal
> quantities with the LCD modules, and assemble them in advance.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>