Analogue-sequencer

James, thanks for your help. You would seem to be a smarter man than me 
because I cant get even close to getting sync. Does anyone know what 
settings actually work in Cubase because I am pretty sure I have tried 
everything and nothing changes. I have made sure that the P3 isnt 
transmitting MIDI clock and there is no other MIDI input to the MIDI 
express XT except the Sequentix...and tried every combination of 
MTC/MIDI clock options. If theres anyone out there with the magical 
combination I would really appreciate it. Cheers
.

James Coplin wrote:
>  
>
> I'm syncing mine to Cubase with zero problems.  A couple
> of things to check, are you using MTC or MIDI clock or
> both?  I'm away from my config to
> check but some devices get upset with the wrong one or
> without one.  Also, make sure that you aren't also sending
> clock from the P3 into Cubase and sending it back out to
> itself again.  This forms a clock loop which makes things
> all sorts of goofy.
>
> Unfortunately, my DAW is dead and down at the moment so I
> can't look up any settings but mine
> locked Cubase wonderfully.  In fact, I'm using it as a
> clock filter for my Schaltwerk which always had sync
> issues
> driving from Cubase.  Using Cubase to sync the P3 and
> using the P3 clock to drive the Schaltwerk made everything
> super solid.
>
> James R. Coplin
>
> On Tue, 20 Oct 2009 23:18:47 +0100
> sean zoega <sean@zoega.co.uk <mailto:sean%40zoega.co.uk>> wrote:
> > I only have MIDI clock on one output going to P3...with
> >Cubase in
> > Internal Timecode and no MTC
> > I have tried all possible options of
> > MIDI clock follows project position
> > Always send start message
> > Send MIDI clock in stop mode
> >
> > What are these tempo functions that you talk of
> > cheers
> >
> > boops.secretvibes wrote:
> >>
> >>
> >> Hi ,do you know well Cubase ?the tempo functions?,do you
> >>sync yet with
> >> cubase and ext devices, here my P3 is perfectly
> >>sync(slave)and all the
> >> synths,module behind the P3 just fine;even a
> >>monome;regards
> >>
> >> --- In analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>,
> >>"seanzoega"
> >> <szoega@...> wrote:
> >> >
> >> > Well to be honest...double speed was a guess...I
> >>halved the timebase
> >> of all the patterns and it seemed closer. There doesnt
> >>actually seem
> >> to be any timing of the P3 whatsoever as the tempo of
> >>the P3 doesnt
> >> match that of Cubase i.e. its not constanly out of time
> >>it drifts. My
> >> setup is Cubase to MOTU Midi Express XT to Sequentix.
> >>Has anybody
> >> managed to sync anything to Sequentix using MIDI clock
> >>or are we
> >> talking stand-alone only for this box (if so anyone want
> >>to buy a P3)
> >> >
> >> > --- In analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>,
> >>"boops.secretvibes"
> >> <boops.secretvibes@> wrote:
> >> > >
> >> > > i feel ,your sync configuration is not well done...
> >> > >
> >> > >
> >> > > --- In analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>,
> >>"Ditton33" <ditton33@>
> >> wrote:
> >> > > >
> >> > > > Interesting.
> >> > > >
> >> > > > I just assumed it was me and was too embarrassed
> >>to ask.
> >> > > >
> >> > > > I don't see anything as definitive as the double
> >>speed.
> >> > > >
> >> > > > What I experience is mush. Everything out of time.
> >> > > >
> >> > > > I blamed the GenoQs but now it's gone it's still
> >>the same.
> >> > > >
> >> > > > I'm pretty sure it's not the P3 but it is
> >>frustrating because
> >> all I'm doing
> >> > > > is feeding a cubase clock through a midisport 2x2
> >>to the P3 but
> >> it's just
> >> > > > not happening.
> >> > > >
> >> > > >
> >> > > >
> >> > > > > >-----Original Message-----
> >> > > > > >From: analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>
> >> > > > > >[mailto:analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>] On Behalf
> >>Of seanzoega
> >> > > > > >Sent: 20 October 2009 22:37
> >> > > > > >To: analogue-sequencer@yahoogroups.com 
> <mailto:analogue-sequencer%40yahoogroups.com>
> >> <mailto:analogue-sequencer%40yahoogroups.com>
> >> > > > > >Subject: [analogue-sequencer] syncing with
> >>cubase
> >> > > > > >
> >> > > > > >has anybody manages to succesfully sync a P3 to
> >>Cubase. I'm
> >> > > > > >not doing too well, first of all P3 plays at
> >>double speed
> >> > > > > >when under ext. MIDI clock but even then the
> >>tempo isnt
> >> > > > > >correct. Any help gratefully appreciated
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > >------------------------------------
> >> > > > > >
> >> > > > > >Yahoo! Groups Links
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > >
> >> > >
> >> >
> >>
> >>
>
>