Analogue-sequencer

Hello Colin,
I've followed your instructions and my P3 came back to life :)
Thank you very much, I was so scared really.

Happy new year, the best for you and Sequentix

Mathieu

--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...> wrote:
>
>  
> > My unit showed a blank screen last time I switched it on. It 
> > was the old display so I installed the new blue lcd but it 
> > was the same: the screen lights up but shows nothing.
> 
> Did you adjust the contrast after fitting the new display ?
> Did the LEDs light up as normal after you had th new display in, but before
> you installed the bootloader update ?
> If so, you probably just need to adjust the contrast, then re-install the
> main P3 code instead of the bootloader update.
> The update does not light any LEDs, it only shows text on the display.
> The contrast trimmer is next to the LCD connector on the mainboard.
> It should be at roughly half-past-two for an LCD display.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>