Analogue-sequencer

Ah ok, rounded allen head screws looks good..

About the colors, yes, but what if there is not UV?

Only kidding, I'd prefer orange for style/appearance too,
but its not a huge issue for me anyway.



On Sun, 22 Aug 2010, Colin Fraser wrote:

> The pozi screws are just what I had in stock.
> Final units will most likely use the same allen head screws I used on the
> prototypes.
> I only had enough of those for the I/O board fixings - have a look next to
> the sockets, compared to the fixings round the panel edge:
> http://www.sequentix.com/images/cirklon/ck-1-02.jpg
>
> Countersunk screws require much more precise alignment of the holes on the
> panel with the captive nuts underneath - that is hard to achieve on the
> chassis where the nuts are on flanges that are folded from edges of the
> bottom face.
> I know of a few cases where the screw heads on P3s got stripped because of
> binding threads, which then required drilling out.
>
> I intend to use white ink for the screening if the factory can source a
> fluorescent white ink.
> I want to make the legend fluorescent to give good visibility using UV on
> otherwise dark stages.
>
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>
>