Analogue-sequencer

I've only ever tried it on an XP machine. I can't recall the detail but from
memory I got similar errors and had to fiddle a bit to get it to work. I
think the issue was that I had a midi merge box in the loop, direct
connection of the P3 to my midiman pc interface sorted it. 

> >-----Original Message-----
> >From: analogue-sequencer@yahoogroups.com 
> >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> >bob_at_work_2000
> >Sent: 08 September 2010 03:11
> >To: analogue-sequencer@yahoogroups.com
> >Subject: [analogue-sequencer] Re: Mem-x Upgrade, OS 4.5 
> >upgrade, Vista and formerly stored P3 sequences....
> >
> >OK....any recommendations/ideas here?  Should I do this on 
> >an XP PC instead?  I tried the P3Tools version 1.x and it 
> >timed out after 14 tries....I see transmit and receive 
> >activity on my 1x1 USB MIDI interface....
> >
> >Bob
> >El Segundo, CA
> >
> >--- In analogue-sequencer@yahoogroups.com, "Bob S." 
> ><tttsystems@...> wrote:
> >>
> >> OK...I got through the first steps.   I was able to dump 
> >and save my P3 memory to my PC using MidiOx.  I also 
> >installed P3 Tools2 on my studio PC, a Vista 64 machine.  It 
> >turns out I don't need to install MS .NET Framework on a 
> >Vista PC, the tools seem to work fine.  I was able to 
> >capture the memory using the P2 Tools2 using that setup.  
> >> 
> >> Next step was to load the new v4.5 OS to the P3.  That did 
> >not work.  After selecting the OS file using the FW option 
> >of the Tools2, a few seconds later I get "Failed: 
> >Retransmissions Exceeded" I have the simple 1x1 MIDI 
> >interface on the P3 MIDI in and MIDI Out #1....is that 
> >right?  Seems like the handshake loop is timing out.
> >> 
> >> I will check the archives and see if anyone else got this 
> >error.....
> >> 
> >> Bob
> >> El Segundo, CA
> >> 
> >> 
> >> 
> >>   ----- Original Message ----- 
> >>   From: Colin Fraser 
> >>   To: analogue-sequencer@yahoogroups.com 
> >>   Sent: Monday, September 06, 2010 10:26
> >>   Subject: RE: [analogue-sequencer] Mem-x Upgrade and 
> >formerly stored P3 sequences....
> >> 
> >> 
> >>     
> >> 
> >> 
> >>   > Does anyone the best procedure to do the mem-x upgrade and 
> >>   > yet keep the old sequences I have in the P3 unit? Do I have 
> >>   > to do a P3 dump to my computer, do the upgrade, then restore 
> >>   > back to the P3? Is there another way?
> >> 
> >>   If you are using v3, I *think* you can take a dump of 
> >the memory, then
> >>   upgrade it to v4 format using P3 Tools 2 - but it's a 
> >long time since I used
> >>   it.
> >>   P3 needs to be running v4 to make use of the extra 
> >memory with MemX, though
> >>   there is a patched version of v3 that will work with it.
> >> 
> >>   Best regards,
> >>   Colin Fraser
> >>   Sequentix Music Systems Ltd
> >>   http://www.sequentix.com
> >> 
> >> 
> >> 
> >>   
> >> 
> >> [Non-text portions of this message have been removed]
> >>
> >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >