Analogue-sequencer

I hope its under £1000, but I have no doubt at all that Colin won't 
charge more than he needs to, or more than is fair...

he deserves to making a living

Richard

On 10/8/10 12:13 AM, musicalgeometry wrote:
>
>
> I totally agree, £1000 doesn't seem overpriced for the Cirklon. >From
> the looks of the build quality and the features this is going to be the
> ultimate sequencer for me. I just hope Colin is able to make enough of
> them to meet the demand. I didn't get on the list till recently and am
> very anxious to be "grinning about my new toy"!
>
> Can't wait.
>
> --- In analogue-sequencer@yahoogroups.com
> <mailto:analogue-sequencer%40yahoogroups.com>, companyofquail@... wrote:
>  >
>  > I don't think 1000 quid is too much to ask for a midi/cv sequencer
> that includes nearly every feature the community asked for. I don't know
> of any sequencers with this much power just in the midi domain that
> command much less.
>  > Sent on the Sprint® Now Network from my BlackBerry®
>  >
>  > -----Original Message-----
>  > From: "analog1k" <analog1k@...>
>  > Sender: analogue-sequencer@yahoogroups.com
> <mailto:analogue-sequencer%40yahoogroups.com>
>  > Date: Thu, 07 Oct 2010 20:01:43
>  > To: <analogue-sequencer@yahoogroups.com
> <mailto:analogue-sequencer%40yahoogroups.com>>
>  > Reply-To: analogue-sequencer@yahoogroups.com
> <mailto:analogue-sequencer%40yahoogroups.com>
>  > Subject: [analogue-sequencer] Re: supply and demand
>  >
>  > That sounds good Colin, but i must emphasise, that if the cost is too
> high, it's a deal breaker for me. The original P3 cost was good for just
> a sequencer, but if it's projected to be within £800-£1K range i would
> expect such to have it's own synth engine included.
>  >
>  > Elektron made a good sequencer in the Monomachine, but they limited
> it by not including adjusting step lengths for each of the 6-tracks, no
> note skipping, no bi-directional sequencing ie: pendulum etc, for some
> that's complete fail. The Cirklon ticks all those boxes Elektron couldn't.
>  >
>  > The Cirklon is definitely in my to buy list... but it's the cost of
> the actual finished unit that's gonna swing it for me.
>  >
>  > Regards
>  > A1K
>  >
>  > --- In analogue-sequencer@yahoogroups.com
> <mailto:analogue-sequencer%40yahoogroups.com>, "Colin Fraser" <colin@>
> wrote:
>  > >
>  > >
>  > > > I tried to do my due diligence and this didn't turn up. Sorry
>  > > > if it was previously asked, but how many cirklon units are
>  > > > projected and how many buyers are on the waiting list?
>  > >
>  > > I'm projecting making as many as people want to buy.
>  > > Now that they seem to know what they're doing, the factory making my
>  > > enclosures can turn out a good number of them in a few weeks.
>  > > I have enclosures for the first fifty units sitting right here,
> waiting for
>  > > their electronics.
>  > > The initial production rate of complete units is limited by the
> fact that
>  > > I'll be stuffing the boards myself until I can fund a factory run
> of the
>  > > electronics.
>  > > Once factory production of board sets is up and running, the lead time
>  > > should come right down, and I'll be able to concentrate mainly on
> making it
>  > > do more cool stuff.
>  > >
>  > > There are a lot of people on the waiting list now, which is nice,
> but I'll
>  > > be happier once they're on the 'grinning about their new toy' list.
>  > >
>  > > Best regards,
>  > > Colin Fraser
>  > > Sequentix Music Systems Ltd
>  > > http://www.sequentix.com
>  > >
>  >
>  >
>  >
>  >
>  >
>  > [Non-text portions of this message have been removed]
>  >
>
>