Analogue-sequencer

Hi Colin

Thank you.

I'm only in play mode.
The upper knobs when moved shows -> "Kn 1-16U: current value_0-127"
The note knobs when moved shows -> "Kn 1-16L: current value_0-127"

Sometimes both show the "stored value" << "current value"

Until now there are 2 devices connected to the P3. One is a JoMoX XBase09 and the other is a Yamaha SY77, but neither of them are reacting to the mixer knobs.

I will try to figure out if P3 is not sending Midi data or if the gear is just don't listening.

Best regards.
¥

 


--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...> wrote:
>
>  
> > I'm quiet new to the P3 and have a question.
> > I set up the mixer function in the user config but it doesn't 
> > work in my set up. Is there something I'm missing in the 
> > configuration?
> 
> The knobs work in a pass-thru mode - you have to pass the stored value
> before it becomes live and starts sending new values.
> That's to stop you having sudden jumps in level when you move the knobs in
> edit mode, and come back to play mode to adjust something.
> Could that be it ? When you move a knob, if it isn't live, you'll see the
> changing current position and the stored value on the display.
> Once it starts transmitting, there should only be one number.
> If that isn't it, next step is to plug the MIDI out cable into something
> that will let you look at the data coming from P3 to see whether it's not
> sending, or your other gear is just not listening.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>