Analogue-sequencer

Hello

I'm quiet new to the P3 and have a question.
I set up the mixer function in the user config but it doesn't work in my set up. Is there something I'm missing in the configuration?


Any help would be appreciated.
Thanks in advanced.
Yves

> I'm quiet new to the P3 and have a question.
> I set up the mixer function in the user config but it doesn't 
> work in my set up. Is there something I'm missing in the 
> configuration?

The knobs work in a pass-thru mode - you have to pass the stored value
before it becomes live and starts sending new values.
That's to stop you having sudden jumps in level when you move the knobs in
edit mode, and come back to play mode to adjust something.
Could that be it ? When you move a knob, if it isn't live, you'll see the
changing current position and the stored value on the display.
Once it starts transmitting, there should only be one number.
If that isn't it, next step is to plug the MIDI out cable into something
that will let you look at the data coming from P3 to see whether it's not
sending, or your other gear is just not listening.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com

Hi Colin

Thank you.

I'm only in play mode.
The upper knobs when moved shows -> "Kn 1-16U: current value_0-127"
The note knobs when moved shows -> "Kn 1-16L: current value_0-127"

Sometimes both show the "stored value" << "current value"

Until now there are 2 devices connected to the P3. One is a JoMoX XBase09 and the other is a Yamaha SY77, but neither of them are reacting to the mixer knobs.

I will try to figure out if P3 is not sending Midi data or if the gear is just don't listening.

Best regards.
¥

 


--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...> wrote:

>
>  
> > I'm quiet new to the P3 and have a question.
> > I set up the mixer function in the user config but it doesn't 
> > work in my set up. Is there something I'm missing in the 
> > configuration?
> 
> The knobs work in a pass-thru mode - you have to pass the stored value
> before it becomes live and starts sending new values.
> That's to stop you having sudden jumps in level when you move the knobs in
> edit mode, and come back to play mode to adjust something.
> Could that be it ? When you move a knob, if it isn't live, you'll see the
> changing current position and the stored value on the display.
> Once it starts transmitting, there should only be one number.
> If that isn't it, next step is to plug the MIDI out cable into something
> that will let you look at the data coming from P3 to see whether it's not
> sending, or your other gear is just not listening.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>

Hi again

I checked and apparently P3 is not sending Midi data from these knobs.
Mixer mode is of course set to "on" and it's sending also Midi notes etc.

Can it be that it has something to do with the Aux? As I've read that some Aux can also be manipulated by these knobs in play mode. But I don't used them in every track, so it doesn't make sense.

Any other suggestions?

Best regards.
¥




--- In analogue-sequencer@yahoogroups.com, "yvesjates05" <yvesjates05@...> wrote:

>
> Hi Colin
> 
> Thank you.
> 
> I'm only in play mode.
> The upper knobs when moved shows -> "Kn 1-16U: current value_0-127"
> The note knobs when moved shows -> "Kn 1-16L: current value_0-127"
> 
> Sometimes both show the "stored value" << "current value"
> 
> Until now there are 2 devices connected to the P3. One is a JoMoX XBase09 and the other is a Yamaha SY77, but neither of them are reacting to the mixer knobs.
> 
> I will try to figure out if P3 is not sending Midi data or if the gear is just don't listening.
> 
> Best regards.
> ¥
> 
>  
> 
> 
> --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@> wrote:
> >
> >  
> > > I'm quiet new to the P3 and have a question.
> > > I set up the mixer function in the user config but it doesn't 
> > > work in my set up. Is there something I'm missing in the 
> > > configuration?
> > 
> > The knobs work in a pass-thru mode - you have to pass the stored value
> > before it becomes live and starts sending new values.
> > That's to stop you having sudden jumps in level when you move the knobs in
> > edit mode, and come back to play mode to adjust something.
> > Could that be it ? When you move a knob, if it isn't live, you'll see the
> > changing current position and the stored value on the display.
> > Once it starts transmitting, there should only be one number.
> > If that isn't it, next step is to plug the MIDI out cable into something
> > that will let you look at the data coming from P3 to see whether it's not
> > sending, or your other gear is just not listening.
> > 
> > Best regards,
> > Colin Fraser
> > Sequentix Music Systems Ltd
> > http://www.sequentix.com
> >
>

Oh dear! You are right!! 
Sorry for bothering, stupid me.

Thank you.

The volume knobs are working fine now for the synth tracks but not yet for the drum machine. The pan knobs are not working for both.

Best.
¥





--- In analogue-sequencer@yahoogroups.com, Paul Nagle <softroom@...> wrote:

>
> On 19/11/2010 16:29, yvesjates05 wrote:
> >
> > Hi again
> >
> > I checked and apparently P3 is not sending Midi data from these knobs.
> > Mixer mode is of course set to "on" and it's sending also Midi notes etc.
> 
> Which knobs are you turning? Just a thought but the mixer knobs are 
> those above steps 9-16 not directly above the tracks themselves. IIRC. :)
> 
> -- 
> Paul
> ---
> http://www.softroom.co.uk
> http://www.youtube.com/WilyEPeyote
>

On 19/11/2010 16:29, yvesjates05 wrote:
>
> Hi again
>
> I checked and apparently P3 is not sending Midi data from these knobs.
> Mixer mode is of course set to "on" and it's sending also Midi notes etc.

Which knobs are you turning? Just a thought but the mixer knobs are 
those above steps 9-16 not directly above the tracks themselves. IIRC. :)

-- 
Paul
---
http://www.softroom.co.uk
http://www.youtube.com/WilyEPeyote

On 19/11/2010 17:00, yvesjates05 wrote:
> Oh dear! You are right!!
> Sorry for bothering, stupid me.

No bother at all, enjoy. :)

I think the idea was that putting the mixer on the right hand side left 
those above the tracks free for aux event-type stuff.

-- 
Paul
---
http://www.softroom.co.uk
http://www.youtube.com/WilyEPeyote