Analogue-sequencer

hi tom,here are some answers colin already gave me:

Let me give you some information about the CVIO option: 

The CVIO board has 16 CV (16-bit resolution) and 8 gate outputs. 
The CV outputs support volts/octave or hertz/volt mode, with glide. 
The gate outputs have a 5v high-level, and can also be configured as analogue inputs with a 5 volt range, 8-bit resolution. 

All the connections are on a 25-pin D-connector on the rear panel of the sequencer. 
A cable will connect to an external break-out box, which we think will probably be available in banana, 3.5mm or quarter-inch versions. 3.5mm and banana sockets can fit the same hole size, so it only means panels with two different hole sizes are required. We're currently finalising production details for the break-out box designs. We intend to offer a choice of table-top or rack-mounting versions. Other form factors will be possible using one-off panels. (The basic break-out box is included in the £1199 price for the CVIO option.)
cheerskris
--- On Tue, 4/5/11, Tom Adam <tom.adam@thebigear.be> wrote:

From: Tom Adam <tom.adam@thebigear.be>
Subject: [analogue-sequencer] analogue outs and break out PCB
To: analogue-sequencer@yahoogroups.com
Date: Tuesday, April 5, 2011, 8:29 PM

Hi Colin,

I have a couple of questions about the analogue outputs...

Is there a Clock/start/stop CV option available?
The CV coming out of the DB25 cable what voltage range do they have? 
(0-10V, -5/+5V,...) Same for the gates.
Is there a way to synchronize the cirklon to an LFO?

Do I need a +/-15V (12V) PSU to power the break out PCB for the analogue 
outs?
How many multiples (e.g. 1 in to 4 outs) can be connected to the output 
of the break out PCB?

On the cirklon, can a track be assigned to multiple CV/gates out?

Thanks a lot

Cheers,
ToAd



------------------------------------

Yahoo! Groups Links






      

[Non-text portions of this message have been removed]