Analogue-sequencer

Thanks a lot for your reply and your research!!
 
Simon




 


To: analogue-sequencer@yahoogroups.com
From: colin@sequentix.com
Date: Wed, 4 May 2011 17:11:00 +0100
Subject: RE: [analogue-sequencer] P3 tools for sequentixP3


  



Hi Simon,

> I am preparing a set with 
> several patterns that I could follow up. The problem is that 
> my patterns are in the wrong order. I therefore wish to use 
> P3tools to rearrange my patterns. I have no problems during 
> the transfer, the problem is copying patterns around inside 
> P3 Tools. When I made ​​a "bank copy" then "paste bank" some 
> patterns are erased or distorted ... I use the V4.5beta for 
> my P3, i installed it with P3tools(version1).

I think this is likely a compatibility problem between P3Tools 2 and v4.5 data.
v4.5 uses the same basic structure of data as v4, but the behaviour is slightly changed.
Instead of having each pattern belong to a specific part and track (the Pn:Tn numbers shown in P3 Tools), each pattern has a number from 1 to 64.
Patterns can be assigned in any part/track location, but they can also exist 'unused' in v4.5
They can't do that in v4. That might be the cause of the missing patterns.
I'm not sure if this can be fixed.
I didn't write P3 Tools, though I think I have a copy of the source somewhere.
I'll need to check with the author if this is likely to be the problem, and whether it would be 5 minutes or 5 weeks to fix it.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com



 		 	   		  

[Non-text portions of this message have been removed]