Yahoo Groups archive

Analogue-sequencer

Index last updated: 2026-04-28 23:15 UTC

Message

Re: [analogue-sequencer] Re: Midi cabling

2011-05-26 by Paul Nagle

Hi John,

I had a quick whizz through connecting hardware synths to my Mac then 
routing Cirklon's output into it....

> I guess the easiest and most helpful thing would be to see if you can
> sequence a hardware synth through Logic, using Cirklon?

OK, no problem doing this. Cirklon sends normal MIDI which you route 
through Logic in the same way as you do your master keyboard. It 
sequenced my Access Virus fine, just as if I were playing it via a keyboard.

>Select a hardware synths track in the arrange, go to it's inspector
>setting and see if you can select Cirklon as its "midi input" so as to
>sequence it.

Oops, I don't know where to select specific MIDI inputs in Inspector, 
that appears to offer only the output field? Anyway, all live inputs 
will drive the selected track/instrument unless, I suppose, you start 
fiddling in the Environment. I'm not a big Logic expert really but if 
you can tell me where to select the inputs I can try in more detail. I 
can do this in Cubase as I know Cubase a bit better.

Did you mean using the Cirklon's USB output rather than one of its MIDI 
outputs? OK, did this once I found a USB cable long enough to reach (had 
to add a hub in the middle). Then I defined an instrument in Cirklon as 
USB1 MIDI channel 1 and sent notes. Again, works as normal.

>Logic to send MTC, Cirklon to receive MTC, to test the sync would also
> be helpful too.

Will do this next, seem to recall testing this many months ago but will 
check again.

All the best (and hope this helps),

Paul

On 25/05/2011 02:44, John wrote:
>
>
> --- In analogue-sequencer@yahoogroups.com, Paul Nagle<softroom@...>  wrote:
>
>> I see from my inbox I was going to formally test using Cirklon as a MIDI
>> input to drive various soft/hard synths in Logic. I really must get more
>> organised and do that, sorry! I'm sure it'll work as I did it months ago
>> but I will pull my finger out this week, John, and report back now I've
>> remembered.
>>
>> --
>> Paul
>
> Thanks Paul. Guess you'd got a little busy of late. Hope to read a report on this soon.
>
> John
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

-- 
Paul
---
http://www.softroom.co.uk
http://www.youtube.com/WilyEPeyote

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.