Re: [analogue-sequencer] Digest Number 204
2004-03-16 by Boele Gerkes
Op 16-mrt-04 om 11:45 heeft analogue-sequencer@yahoogroups.com het volgende geschreven: Colin, I use Sysex Loader on a Mac under OS9. There is only only midi cable attached. Do I presume it right that need to go to the "Rcv Sysex" page (where you can send and receive banks etc.) and enable it? Or does loading the OS need a different config? The delay I will check tonight... GRRR Boele
Show quoted textHide quoted text
>> Stupid question probably, but I just can't get it to work, getting all >> the time a "bad block" message on the P3 asa I try to upload the >> latest revision. > > That can happen if you have your sysex app configured so that the > handshake > response from P3 to each block is soft-thru'ed back to P3. > Try doing it with just the midi out from your PC connected to the midi > in on > P3, and no return lead. > What app are you using ? Midiox ? > You also need to be sure there is a delay of around 100ms between sysex > blocks to give P3 a chance to write each flash block. > > Cheers, > Colin f