Analogue-sequencer

Op 16-mrt-04 om 11:45 heeft analogue-sequencer@yahoogroups.com het 
volgende geschreven:

Colin, I use Sysex Loader on a Mac under OS9. There is only only midi 
cable attached.

Do I presume it right that  need to go to the "Rcv Sysex" page (where 
you can send and receive banks etc.) and enable it? Or does loading the 
OS need a different config?

The delay I will check tonight...

GRRR

Boele



>> Stupid question probably, but I just can't get it to work, getting all
>> the time a "bad block" message on the P3 asa I try to upload the
>> latest revision.
>
> That can happen if you have your sysex app configured so that the 
> handshake
> response from P3 to each block is soft-thru'ed back to P3.
> Try doing it with just the midi out from your PC connected to the midi 
> in on
> P3, and no return lead.
> What app are you using ? Midiox ?
> You also need to be sure there is a delay of around 100ms between sysex
> blocks to give P3 a chance to write each flash block.
>
> Cheers,
> Colin f