Analogue-sequencer

Hi Paul,

Sure it is saturday afternoon and you're absolutely right. So I 
attached the A6 directly to the P3 and things worked ok. :-))))

Colin:
Would it be possible to implement a sort  of non-running record mode? 
Where every keypress enters that note into the step and then advancing 
one step?

Why are we always asking for more? :-)))

Oh and ARP mode is really cool!!!

Boele

> Assume I have one pattern programmed.

...snip...

> I *see* the playlist jump to P:4 R:2 T:0, the led on step 4 turns 
red, 
> but no sound.
> 
> Yes, there ARE notes in pattern 4 and yes, midichannel is set to 1 
as 
> is pattern1.
> 
> I am sure *I* miss something here... But WHAT?

It sounds like you are doing what you're supposed to, and it works 
that way for me.
Have you gone into edit mode on pattern 4 as it plays, to check that 
the position indicator advances across the pattern when it's 
playing ?
If you've been playing with the arpeggiator, maybe you left the 
pattern set at length 1, with step 1 skipped ?
You could always send me a sysex dump so I can check the behaviour 
out here.

Cheers,
Colin f

> Would it be possible to implement a sort  of non-running record mode? 
> Where every keypress enters that note into the step and then 
> advancing 
> one step?

ARP mode does that if you have 'rong' set to off.
Just clr the pattern, then type in the notes. Press a note twice to
leave a space, then exit ARP mode and toggle off the steps you want
rests on.

> Oh and ARP mode is really cool!!!

Yep ;-)
But it might be a little bit broken since the length changing aux events
went in. I'm looking into that...

Cheers,
Colin f

Another question/problem.

Assume I have one pattern programmed.

entering playlist then, setting length to 3, creating three steps in 
the playlist, where step 1 plays pattern 1 once, step 2 plays pattern 1 
once but transposed by +3 and step three plays pattern 1 twice, but 
transposed -2.
Then leave playlist by saving it gives a nice result. It plays pattern 
1, once on the original tuning, once transposed by 3 semitones and then 
twice transposed 2 semitones. So far so good.

No I do want to have step 3 using a *different* pattern, for instance, 
I programmed pattern 4 with different notes already transposed.

Am I right assuming that entering the playlist again, changing pattern 
1 in step 3 to pattern 4 and also set tranpose for that step to 0 
again, then saving the playlist again, should play
pattern 1 not transposed
pattern 1 +3 transposed
pattern 4 twice not transposed?

Well, it does not.

It plays pattern 1 once, then pattern 1 +3 transposed once and then 
there is silence for two bars.

I *see* the playlist jump to P:4 R:2 T:0, the led on step 4 turns red, 
but no sound.

Yes, there ARE notes in pattern 4 and yes, midichannel is set to 1 as 
is pattern1.

I am sure *I* miss something here... But WHAT?

:-)))

Boele