Analogue-sequencer

> Sending of midi clock is optional. From play mode, press FUNC+PAGE and 
you
> should see the 'mclk' option above F1. Make sure it's set to ON.
> You also need to set the 909 to sync to midi clock.
> Hold shift and press TEMPO MODE until you see a 0 in the middle digit of 
the
> display.
> Alternatively, you could use the DIN sync output from P3 to sync the 909.
> 
> Cheers,
> Colin f

Hi;

I already put  the mclk thru channel 1 but nothing yet...

Also could you tell me how to assign the upper row to send midi cc like 64 per 
example?

Thanks;

Hans

> I can´t sync the TR-909 via midi with the P3, I had a problem ,it was 
that=
>  the sequencer triggered some drums but I changed the default omni mode.
> I want the 909 to  run in sync when I press the run /stop buttons on the
P3=
>  . I
> been working this way with the Doepfer MAQ  before,but the 909 doesn´t run
=
> here.So it seems the P3 doesn´t send midi clock

Sending of midi clock is optional. From play mode, press FUNC+PAGE and you
should see the 'mclk' option above F1. Make sure it's set to ON.
You also need to set the 909 to sync to midi clock.
Hold shift and press TEMPO MODE until you see a 0 in the middle digit of the
display.
Alternatively, you could use the DIN sync output from P3 to sync the 909.

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2