Analogue-sequencer

Folks,

v3.98 (in files now) adds per bank midi channels.
This is not active by default - there is a user config option,
'Mchans per bank', that you will need to turn on.
Once that is done, you need to reset the midi channels for all banks.

This build also resolves a long standing issue. If you had a note 
currently held on a playing pattern, and changed midi channel on 
that track, the note would be left hanging as the note-off message 
would be sent on the wrong channel.
I was aware of this, but had never really had a problem with it, as 
changing midi channels on the fly during playback wasn't something I 
thought was likely to happen.
However, since a note on the last step of a pattern with tie set 
could be left hanging over to the next pattern on another bank, with 
per bank midi channels the note was more likely to be left hanging.
So I fixed it.

Cheers,
Colin f

thanks for your good work colin!

wanna try this feature out this weekend,

if i get a bad block message for upgrading firmware 
via mac osx sysx, what  am i doing wrong?

thx
mag

--- colinfraser_com <colin@colinfraser.com> wrote:

> 
> 
> Folks,
> 
> v3.98 (in files now) adds per bank midi channels.
> This is not active by default - there is a user
> config option,
> 'Mchans per bank', that you will need to turn on.
> Once that is done, you need to reset the midi
> channels for all banks.
> 
> This build also resolves a long standing issue. If
> you had a note 
> currently held on a playing pattern, and changed
> midi channel on 
> that track, the note would be left hanging as the
> note-off message 
> would be sent on the wrong channel.
> I was aware of this, but had never really had a
> problem with it, as 
> changing midi channels on the fly during playback
> wasn't something I 
> thought was likely to happen.
> However, since a note on the last step of a pattern
> with tie set 
> could be left hanging over to the next pattern on
> another bank, with 
> per bank midi channels the note was more likely to
> be left hanging.
> So I fixed it.
> 
> Cheers,
> Colin f
> 
> 
> 
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> $9.95 domain names from Yahoo!. Register anything.
>
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/QnLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
>  
> Yahoo! Groups Links
> 
> http://groups.yahoo.com/group/analogue-sequencer/
> 
>     analogue-sequencer-unsubscribe@yahoogroups.com
> 
>  
> 
> 
> 
> 



		
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com

> if i get a bad block message for upgrading firmware 
> via mac osx sysx, what  am i doing wrong?

Most common cause is a midi loop - if P3 gets its acknowledge message back
from the device sending it the dump, it will show 'bad block'.

Cheers,
Colin f