Analogue-sequencer

> Hey, that rotating of the pattern is what I meant before. I'll check the
> manual and do a search on "rotate".

The P3 rotate is on the edit softkeys labelled '<- shift ->'.
F1 and F2 shift the whole pattern left or right.
If you hold FUNC, only the steps up to the last step are rotated.
All values for each step are rotated, so you can't rotate notes but not
gates for example.
That wouldn't be hard to add, but there's not an obvious key combination for
it, and you know how people moan about shifted functions ;-)

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2

Colin f wrote:
>> Hey, that rotating of the pattern is what I meant before. I'll check
>> the manual and do a search on "rotate".
> 
> The P3 rotate is on the edit softkeys labelled '<- shift ->'.
> F1 and F2 shift the whole pattern left or right.
> If you hold FUNC, only the steps up to the last step are rotated.
> All values for each step are rotated, so you can't rotate notes but
> not gates for example.
> That wouldn't be hard to add, but there's not an obvious key
> combination for it, and you know how people moan about shifted
> functions ;-) 
> 

Thanks, Colin!

Gert
www.waveworld.tv