Analogue-sequencer

Hi folks,
First I want to say that I put 2 pictures of my P3 on the yahoogroup 
website, one of the outside, and one of the inside, for I put the 
mainboard on a piece of wood wich I atached with spacers to the 
spacers of the keyfunction baord and the stepkey/LED board. 
The only thing I got on my wishlist so far is a second set of boards. 
I never used a main sequencer, I tried and used Notator for a while 
with an Atari Stacy, but I didn't get satisfied with the combination 
of my old rocking machines and the gazing at a computerscreen. But 
this machine does almost everything I did with Notator, but now you 
can feel it, so I want another with the R3 firmware for my drumboxes. 
But as stupid as I am, I putted the LED's the wrong way in. I didn't 
notice it first for everything seemed to work right, but as I started 
reading the manual I noticed that my LED's are red where the supposed 
to be green and otherwise. I really looked at the 45" angle as Colin 
described so I don't understand how this happened. I didn't mind for 
everything seemed right, but I'm not sure now. For I don't get the 
function keys to work. When the machine is on the little red leds are 
always shining, and the upper row of knobs is on velocity mode. I 
don't now how I could change this to gate lenght, for example. Can 
someone help my, or is it because of the reversed LED's?
And I can't find the P3-sysex.pdf in the yahoo files. I only see: P3-
sysex.txt
Cheers,
Roel